Product Description
ILC ILC-SWX-950-AX Hybrid Wireless/Wired Power Pack Load Controller
Intelligent Lighting Controls wireless power pack controllers switch on/off power to a connected lighting load as directed by wirelessly linked sensors and wall controls. Additionally, the unit’s 0-10V dimming option greatly simplifies applications where dimming control from multiple switch locations is required. For applications where a hybrid wireless/wired architecture is desired, this wireless power pack can also be ordered with auxiliary low voltage connections.
The ILC wireless power pack is rated to switch fully loaded circuits and utilizes a powerful microprocessor to optimize its switching timing, ensuring long relay life even when controlling high-inrush LED lighting. As with all ILC products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple with snaps for quick installation and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All ILC-SWX products are proudly made in the USA.
Features
- Wirelessly Links to Sensors & Wall Stations
- Pairs in Seconds up to 50 Remote Devices
- Switches Up to 20A Line Voltage Loads
- Electronically Timed Switching Ensures Long Relay Life
- Integrated Test/Programming Button à Plenum Rated (UL 2043)
- Configurable Time Delays and Operational Modes (e.g. Occupancy/ Vacancy)
- Optional 0-10V Dimming Output for Partial On & Partial Off Operation
- Optional Low Voltage Sensor & Wall Station Wired Connectivity
Specs
ELECTRICAL:
- OPERATING VOLTAGE: 120/277 VAC, Single Phase, 50/60 Hz
- CLASS 2 OUTPUT RATINGS: 18 VDC, 150 mA (-AX version)
- RELAY CURRENT REQS: 55 mA
- LOAD RATINGS: 20A @ 120 VAC - General Purpose Plug Load, 20A @ 120/277 VAC - General Purpose, Tungsten, Magnetic Ballast, 16A @ 120/277 VAC - Electronic Ballast, LED Driver
- DC LOAD RATINGS: 20A @ 28 VDC (MAX), 1A @ 5 VDC (MIN)
- DIMMING LOAD: (Models with -D2 option only) 50mA, (0-10 VDC ballasts or drivers compliant with IEC 60929 Annex E.2)
- MOTOR LOAD: 1 HP
- ESD IMMUNITY: Tested to withstand electrostatic discharge without damage or memory loss
ENVIRONMENTAL:
- OPERATING TEMP: 32°F to 122°F (0°C to 50°C)
- RELATIVE HUMIDITY: 0-95% Non-Condensing Indoor Use Only
WIRELESS:
- RANGE: 80’ line of site w/o obstruction (walls), 40’ with obstruction (walls/floors)
- FREQUENCY: 915 MHz ISM Band
- WIRELESS LINKING: Simple 3 sec. Push Button Process
- SECURITY: All Wireless Data is Encrypted
PHYSICAL:
- SIZE: 3.00” H x 2.25” W x 1.88” D (7.62 cm x 5.72 cm x 4.78 cm)
- WEIGHT: 6.00 oz.
- COLOR: Blue
- MOUNTING: 1/2” Knockout
- RELAY TEST BUTTON
- LED STATUS INDICATOR: Bi-color White & Blue
OPERATION:
- OPERATING MODES Occupancy & Vacancy Partial On/Off (-D option) TIME DELAY OPTIONS 1, 5, 10, 15, 20, 30 min.
CODE COMPLIANCE:
- These power packs can be used to meet ASHRAE 90.1, IECC, & Title 24 energy code requirements
Other Details
Intelligent Lighting Controls (which will be referred to as ILC in this document) shall comply with the terms and provisions of the customer’s purchase order, unless ILC’s terms and conditions differ from the customer’s, then ILC’s will apply. Any variation to the ILC standard terms and conditions that we accept will be set forth on the face of the acknowledgement and invoice.
Condition of Sale Minimum order of $75.00 at net billing price, excluding freight charges. Cancellations of orders after factory engineering or order acknowledgement are subject to an engineering fee of up to 50% of the entire purchase order amount. Any custom material orders cancelled after order acknowledgement may be subject to a cancelation fee. When orders are not shipped because of specific instructions dictated by the customer, the price of the equipment, as stated on the Company’s order acknowledgement, is valid from the date of the ILC order acknowledgement. ILC reserves the right to re-price any order 90 days after the date of order acknowledgement if a shipping date is not provided and agreed upon by ILC.
Delivery- Estimated shipping dates are approximate and are based upon information supplied by vendors. ILC shall not be liable for delays in delivery or failure to manufacture or deliver (1) due to acts of God, acts of civil or military authority, priorities, fires, strikes, floods, epidemics, war, riot, delays in transportation, or (2) due to causes beyond its reasonable control, or (3) inability due to causes beyond its reasonable control to obtain necessary material, labor, components or manufacturing facilities.
Terms- Net 30 days. Any changes from our terms must be the decision of an officer of ILC, conveyed in writing to or in conjunction with our acceptance of the order. Prices are subject to increase by the amount of any present or future taxes or increase in taxes upon the manufacture, sale, use or transportation the herein products imposed by the Federal, State, Municipal or other public authorities which the seller may be required to pay.
Shipments- All shipments are F.O.B., ILC. ILC’s responsibility ceases upon delivery to the carrier. Freight claims for damaged or lost shipments are to be filed to ILC within ten (10) days of receipt. ILC reserves the right to route all shipments. Shipments will be made by alternate route or carrier if expressly requested by the customer. Charges for such shipments will be billed to the customer.
Freight Charges- Freight charges are prepaid and allowed on orders with a total net invoice value of $5,000.00 or more, to be shipped to any continental United States destination. For Alaska, Hawaii and Puerto Rico, freight allowance will be made to the nearest port of embarkation in the continental U.S. All other orders will be shipped prepaid and charged.
ILC will replace or repair, at its option, any material found to be defective from workmanship within the warranty period listed below unless otherwise noted in quotation/submittal documentation. Warranty periods, for Apprentice, begin at the date of shipment. Warranty periods, for LightLEEDer systems begin at the date of Startup. Extended warranty periods can be purchased at additional cost. This warranty is exclusive to parts manufactured by ILC. Any product that is supplied as resale will be subject to that manufacturer’s standard warranty. ILC is not responsible for damage due to improper installation, physical damage, poor operating practice, or other matters outside of ILC’s control such as lightning, flood, tornado, earthquake or hurricane.
Charges will be invoiced to the distributor if ILC is called upon to make a system functional because of incorrect field assembly of products. ILC shall not be liable for consequential damage in case of any failure to meet the conditions of any warranty of Shipping Schedule, nor will claims of labor, loss of profits, repairs or other expenses incidental to replacement be allowed. No representative, person, agent or dealer is authorized to give any warranties on behalf of ILC, or to assume for ILC any other ruling in connection with any of its products unless made in writing and signed by an officer of ILC. The above warranty applies only to products purchased directly from ILC and for which payment has been received in full accordance with the terms and conditions stated herein.
Product Videos