Product Description
ILC ILC-PARTITION Partition Sensor Emitter and Receiver
The ILC Photoelectric Partition Sensor is used to automate room combine operations. The transmitter and receiver pair can be mounted in the ceiling to detect the state of a movable divider wall. The PPS is used in conjunction with a LSCOS8l input and is powered by the module, then programmed from the LightLEEDer or EVO panel to combine LightSync switch stations, touch screen stations or motions sensors to control two rooms for a combine operation.
Note: Works with ILC's occupancy sensor inputs either on the EVO or an LSOS8I
Features
- Made in the USA
- IR Beam Photoelectric Sensor pair
- 19ft (6m) sensor range
- Ceiling mounted on both side of partition
- Low Profile size
- LED status indicator
- Easy to Install assembly
- Powered by LSCOS8l module
- M12 Connector with 6.5 ft (2m) cable provided
- No Setting required at the sensors
- 24VDC powered output
Specs
Safeguards:
- Overcurrent protection
Physical:
- 2.95” X 0.67” - 18mm sensor
- Mounting Nuts and washers provided
- M12 screw on connector and 6.5 foot (2m) cable lead included
- Paired devices Transmitter and Receiver included
- Status LED of receiver
- NPN right angel sensors
- IR Beam
Electrical:
- 10-36VDC
- 10mA Receiver, 15mA Emitter
Operating Environment:
- Location: Interior space
- Operating Temperature: -25° to 55° C
- Humidity: 10% - 90% Non-condensing
- Atmosphere: Non-explosive/corrosive
- Vibration: Stationary
- IEC IP67
Certifications and Approvals:
- UL CUL