Product Description
HazeBase HB-0832 THE FAB 500W Water-Based Haze Machine with Built-in Remote and DMX in Flightcase
Overview
The Fab is a haze generator of the latest generation. It offers a wide range of applications to display your lighting effects even better.
THE FAB is used to generate haze. Thus, the atmospheric effect can be created, which is necessary for an appealing light show.
Due to the adjustability of pump capacity, fan speed and angle of attack of the two air baffles, almost any desired haze density can be generated. A newly developed vegan, highly concentrated fluid is used. This produces the finest droplets with maximum lifetime in the air.
Its two extremely quiet and adjustable fans allow it to be used in areas where ambient noise is a nuisance.
THE FAB also offers countless possibilities for control. In addition to the direct operation on the device via touch screen, the dark generator can be controlled remotely via DMX512/RDM, as well as via Ethernet (Art-NetTM and sACN). But also a cable remote control or radio remote control are optionally available.
As standard, THE FAB is mounted in a 19" 2U road case. The 1 liter fluid bottle lasts from about 150 hours at the lowest settings to 3 hours at maximum output.
THE FAB's directly heated evaporator is up to operating temperature in less than 10 seconds and requires only 500W despite extremely high output rates. Its wide range input (100V-240V AC) allows it to be used anywhere in the world.
Features
- Haze density 1-100% controllable.
- 2,8" TFT-Display with capacitive touch panel, automatically display rotation (0� / 180�).
- 2 motorized controllable air leading blades, +/- 45 � swiveling.
- Integrated 2-Port-Switch.
- 19" Flightcase with 2 HE/2U.
Specifications
- Procedure: Haze machine without compressor
- Form factor: 19" Flightcase with 2 HE/2U
- Power: 90-265 V~, 50-60 Hz, 500 W (PowerCON TRUE1)
- Warm up time: 5 seconds
- Fluid bottle: 600 ml or 20.2 oz integrated cartridge, integrated pump for refilling
- Haze density: 1-100% controllable
- Integrated fans: 2 x 100 m�/h axial fans, Each controlled from 0 to 100, speedometer signal
- Air leading metal: 2 motorized controllable air leading blades, swiveling +/- 45 �
- DMX-Footprint: 3-channels (Fluid pump, fan speed, angle )
- Operation: 2,8" TFT-Display with capacitive touch panel, automatically display rotation (0� / 180�)
- Communication interface: 10/100 Mbit Ethernet with integrated 2-Port-Switch - 5 pol XLR In/out
- Support protocols: Artnet, sACN, DMX512, RDM
- Integrated sensors: Fan speed, Fluid level, accelerometer, temperature sensor
- Integrated battery: 4x NiMH batteries for configuration without power cord
- Fluid types: Base V
