The GLP JDC Burst 1 is the next evolution in high-performance strobe and wash lighting, building on the legacy of the JDC1 and incorporating cutting-edge technology from the groundbreaking JDC2. Designed as a powerful successor, the Burst 1 sets new benchmarks in brightness, color versatility, and flexibility, all while featuring a rugged, IP65-rated construction for reliable operation in even the most demanding environments.

Equipped with a segment-controlled white strobe line and two RGBW LED plates, the JDC Burst 1 delivers stunning, dynamic color effects. Its motorized 185° tilt and precise control over 20 x 240 RGBW pixels—divided into 12 x 4 segments with 5 x 5 pixels each—enable breathtaking visuals that transform any stage into an immersive spectacle.

The new ultra-bright white strobe LEDs provide three times the brightness of the JDC1, producing intense flashes with unmatched impact. Meanwhile, the powerful RGBW LEDs offer an expanded color spectrum, including delicate pastels and deep, saturated hues. Color performance has been significantly enhanced, boasting a +120% increase in red, +60% in green, and +30% in blue compared to its predecessor.

Engineered for durability, the JDC Burst 1 features a fully sealed IP65-rated housing, protecting it from harsh weather conditions, pyro debris, and confetti buildup. Unlike conventional fixtures that require frequent maintenance due to particle intake, the sealed design ensures long-lasting performance with minimal upkeep.

Seamless integration into any lighting setup is made easy with its multi-patch functionality and flexible control options, including DMX, ArtNet, sACN, and GLP iQ.Mesh. Weighing just 14 kg and featuring ergonomic carrying handles, the JDC Burst 1 is highly portable and easy to handle. Its versatile mounting system, including Camlock quick-release fasteners for vertical installation, allows for effortless positioning in various configurations.

Whether used as a powerful strobe, an expressive wash light, or a dynamic effect fixture, the JDC Burst 1 unlocks endless creative possibilities, delivering unparalleled impact to any lighting design.

Features

Powerfull white strobe line
RGBW LED Plates for clean white punch
IP65 - Protection against wind, rain, dust, dirt, fog fluid and confetti particles
PowerCon True1, DMX, RDM, ArtNet, sACN, GLP iQ.Mesh System
Compact design

Specifications

Light Source
- Type: White Strobe LED | RGBW LED
- Light Source Count: 60 x 20 Pixel
- Light Source Power: 2x 700 W
Optical System
- Output:
- Plate: 42000 lm
- Beam: 63000 lm
Effects:
- Dimmer: 0 – 100%; 16 bit
- Tilt Movement Angle: 185°
Control
- DMX channels: 19, 37, 227, 245
- Control Modes: 4
- Protocol:
  - DMX (USITT DMX512-A)
  - RDM (ANSI/ESTA E1.20)
- Setting and addressing:
  - control panel with backlit graphic display
  - 4 Button Menu Navigation
  - DMX
  - RDM
  - iQ.Mesh
- Software Update:
  - DMX link
  - via DProg
  - iQ.Mesh
- High-Res Channels:
  - Dimming
  - Tilt
- Performance Modes:
  - fast
  - normal (balanced)
  - smooth
- Dimming Curves:
  - linear
  - soft
- Fan Modes:
  - regulated
  - high
  - medium
  - low
- Others:
  - Stand Alone 1 captured Scene
  - Beam Pattern Effect Engine
Connectors
- Signal connection:
  - XLR 5-Pin
- In/Out
  - Gigabit etherCON In/Out (failsafe)
- Power input:
  - Neutrik powerCON TRUE1
  - In/Out
Electrical Specifications
- Power input: 100 – 240 VAC / 50 – 60Hz
- Power supply: auto-ranging electronic switch-mode
Thermal Specifications:
- Cooling: combined convection and forced air
- Temperature range, operating: -10 °C / 14 °F to 45 °C / 113 °F
- Mounting Options:
- Mounting:
  - 1 pair of 1/4-turn locks
  - 2 pair of 1/4-turn locks
  - 2 eyelets for safety cable
  - eyelets for safety cable
- Orientation: any
- Location:
  - Indoor permanent
  - Outdoor temporary
- min. distance to combustible materials: 0.1 m / 3.94 in
- min. distance to illuminated surfaces: 1.0 m / 39.4 in
Construction:
- Housing Color: Black
- Housing Material:
  - high-impact flame-retardand thermoplastic
    - Aluminum
- steel metal plates

Other Details

1. GLP warrants for defects of the service object at its discretion via repair/rectification in the form of a defect removal or new production/new performance of a defect-free service object. Should the repair/rectification fail at least twice, then the customer is entitled at its own discretion to request a reduction of the remuneration (deduction) or a revocation of the agreement (withdrawal). The customer shall also have the right to choose between a deduction or a withdrawal from the contract should GLP refuse to carry out the repair/rectification as a result of it only being possible at disproportionate cost. However, the customer is only entitled to a withdrawal from the contract if the defect is significant and the service provided by GLP is of no interest without a repair/rectification. Before withdrawing from the contract, the customer must have provided GLP with an unmet reasonable deadline for the repair/rectification or new production/new performance in writing; § 4 paragraph 2 lines 2 and 3 apply accordingly. 2. Claims for material defects shall not apply in the case of minor deviation from the contractual quality of the service object (§ 2 paragraph 2) or in the case of minor impairment of its usefulness. 3. Warranty claims from the customer (reduction, withdrawal, damages) come under the statute of limitations in 12 (twelve) months. The warranty period begins at the point of acceptance/transfer of risk. This does not apply if § 438 paragraph 1 no. 2, 479 paragraph 1 and 634 a paragraph 1 no. 2 of the German Civil Code (BGB) stipulate longer time periods, as well as in the event of injury to life, body, or health, or breach of duty by gross negligence by GLP, or the fraudulent concealment of a defect.

Product Videos

Custom Field

Product Reviews

Data Sheet

Shop by Category

Shop by Brand

German Light Products 7451 JDC Burst 1 IP

Product Description