Product Description
Galaxy Audio EDXR/HHBP* Wireless Microphone System With Headset Or Lavalier Microphones
Includes 1 EDXR dual receiver, 1 MBP38 belt pack, 1 HS13-UBK headset microphone or 1 LV-13BK lav microphone, and 1 HH38 handheld transmitters.
The EDX Series is a professional dual channel UHF wireless microphone system. The EDX features 2 internal antennas (1 for each receiver), 16 selectable channels on each receiver, and IR Sync from receiver to transmitter. The EDX has 2 discreet male XLR outputs and 1 combined 1/4″ output on the back of the unit. The output is controlled by a volume control for each receiver, located on the front of the unit.
The EDXR 2 channel wireless microphone system can be used and will sync with either the HH38 handheld or the MBP38 body pack transmitters. Systems with the MBP38 body pack are available with either a lavalier, or headset. Both transmitters feature an on/off switch and are powered by two “AA” batteries. The MBP38 body pack transmitter also features a Mic/0/-10 selector switch for various input level sources.
- 200′ Range
- 16 Selectable UHF Frequencies
- Internal Antennas
EDXR Receiver
- Dual Channel Receiver
- AF & RF Indicators
- IR Sync Receiver to Transmitters
- 1 Mixed 1/4″ Output, 2 Balanced Male XLR Outputs
- 2 Internal Antennas (Non-Diversity)
- Rugged Plastic Casing
EDX SYSTEM SPECS | |
Available Channels | 16 |
Frequency Range | CODE D 584-607 MHz CODE N 518-542 MHz |
Transmitter Output Level | 10 mW |
Band | UHF |
Operating Range | Under Typical Conditions 200' (61 m), actual range depends on RF signal absorption, reflection, and interference. |
Audio Frequency Response | (+/-3 dB) 60 Hz ~ 16 kHz |
Total Harmonic Distortion | (+/-30 kHz deviation 1 kHz tone): <1% |
Dynamic Range | >90 dB A-weighted |
Operating Temperature Range | 14º F to 122º F (-10º C to 50º C), battery characteristics may limit this range. |
EDXR RECEIVER | |
Audio Output Level | XLR Connector (into 600 Ohms load) -12 dBV 1/4" Connector (into 3 k Ohms load) -18 dBV |
Output Impedance | XLR Connector 200 Ohms 1/4" Connector 1 k Ohms |
Sensitivity | -92 dBm |
Image Rejection | >92 dB |
Dimensions | 1.7" x 8.3" x 5" (42 x 210 x 127 mm) (HxWxD) |
Weight | 13.6 oz (390 g) |
Power Requirements | 12-18 V dc at 300mA, supplied by external power supply |