Product Description
ETC SELD60VI-0 D60 Vivid
The Selador Desire D60 fixture puts the seven-color x7 system into a high-brightness, 60-emitter, round theatrical washlight. Highly efficient primary lenses and careful color choices make the D60 fixture ideal for stage, studio and anywhere strong color and high intensity are requirements. The Selador x7 Color System produces the widest range of spectral-balanced saturated and tinted color choices available. D60’s rugged die-cast enclosure; quiet, fan-cooled operation; multiple lens options; and advanced user interface make it ideal for multiple applications.
D60 LED array options
D60 fixtures are based on the x7 Color System that uses seven different LED colors to achieve true, usable broad-spectrum color. The D60 luminaire is available with any one of the following x7 color arrays (not interchangeable) to best suit the intended application:
• D60 Vivid – the x7 Color System array balanced for best all-around use as a color-changing wash fixture
• D60 Lustr+ – optimized array with six colors plus high intensity white LEDs to create an ideal front light wash fixture for full-range color, with an emphasis on lighter colors and white and natural illumination of skin tones
SPECS
GENERAL
• 60-LED color mixing wash fixture
• ETL Listed to UL 1573 – the standard for stage and studio lighting units
• IP20-rated for indoor use
• Power and DMX in/thru connections for easy setup
• User-friendly control interface with multiple modes and fixture settings
PHYSICAL
• Rugged die-cast all-metal housing
• Easy access slots for secondary lenses and accessories
• Uses 8-7/8”/225mm lenses and accessories
• Available in black (standard), white or silver (optional) or custom colors (contact factory)
• Hanging yoke standard. Optional yoke/floor stand available
ELECTRICAL
• 100VAC to 240VAC 50/60Hz universal power input
• Neutrik power in and thru connections
• Up to nine fixtures (15A max) may be linked via power thru connector (10 fixtures total per circuit) when used with R20 Relay Module or Unison Echo Relay Panel. Consult breaker trip curves when used with other equipment
• Requires power from a non-dim source
• Inrush
- 120V: 15A (First half-cycle)
- 240V: 40A (First half-cycle)
LED*
• 50,000-hour LED life (50,000 hours to 70% intensity)
• 60 Luxeon Rebel LED emitters
*See additional LED notes
COLOR
• Exclusive x7 Color System seven-color LED arrays
• Beautifully illuminates skin tones and other objects for natural appearance and high color rendering
• Broad spectrum color interacts seamlessly with conventional sources
• Exclusive red-shift option emulates tungsten dimming performance
• Variable color temperature from 2700K-6500K
OPTICAL
• Primary field angle of 17° and beam angle of 8°
• Secondary lenses available for multiple beam-spread options
• Each fixture ships with a Very Narrow lens; additional lenses must be ordered separately
• Refer to accessory charts for lenses available
CONTROL
• DMX512 in and thru via five-pin XLR connectors
• Multiple control options including RGB, strobe, and consolefree Master/Slave mode
• See DMX Control Table for additional information
• 15-bit virtual dimming engine provides smooth, high-quality theatrical fades and minimizes color-shift during dimming
• RDM functionality for address and setting changes
THERMAL
• Ambient operating temperature of -4° to 104° F (-20° to 40° C)
• Active electronic thermal management for droop-free operation
• Low-noise fan cooling
• Fixture is designed for continuous operation up to 104° F (40° C) ambient temperature and requires free flow of air around fixture housing