Product Description
ETC D40 Vivid Washlight Fixture, Black
The ETC Selador ® Desire D40 fixture puts the seven-color x7 system into a round theatrical washlight. Highly efficient primary lenses and careful color choices make the D40 fixture ideal for stage, studio and anywhere strong color and high-intensity are requirements. The Selador x7 Color System™ produces the widest range of spectrallybalanced saturated and tinted color choices available. D40’s rugged die-cast enclosure, noiseless fan-free operation, multiple lens options and advanced user interface make it ideal for multiple applications.
D40 LED ARRAY OPTIONS D40 fixtures are based on the x7 Color System which uses seven different LED colors to achieve true, usable broad-spectrum color. The D40 luminaire is available with any one of the following x7 color arrays (not interchangeable) to best suit the intended application:
• D40 Vivid – the x7 Color System array balanced for best all-around use as a high-intensity color-changing wash fixture
• D40 Lustr+ – optimized array with six colors plus highintensity white LEDs to create an ideal frontlight wash fixture for full-range color, with an emphasis on lighter colors and white. It naturally lights skin tones
ORDERING INFORMATION
Selador D40
MODEL DESCRIPTION
- SELD40VI D40 Vivid
- SELD40LI D40 Lustr+
- Note: D40 luminaires ship with a hanging yoke and an input lead with connector of choice. See page 2 for connector options. C-clamps are not included.
SPECIFICATIONS
GENERAL • 40-LED color-mixing wash fixture • ETL Listed to UL1573 – the standard for stage and studio lighting units • IP20-rated for indoor use • Power and DMX in/thru connections for easy setup • User-friendly control interface with multiple modes and fixture settings
PHYSICAL • Rugged die-cast all-metal housing • Easy access slots for secondary lenses and standard 7.5” PAR accessories • Available in black (standard), white or silver (optional) or custom colors (contact factory) • Hanging yoke standard. Optional yoke/floor stand available
ELECTRICAL • 100VAC to 240VAC 50/60Hz universal power input • Neutrik power in and thru connections • Up to nine fixtures (15A max) may be linked via power thru connector (10 fixtures total per circuit) when used with R20 Relay Module or Unison Echo Relay Panel. Consult breaker trip curves when used with other equipment • Requires power from a non-dim source • Inrush - 120V / 15A (First half-cycle) - 240V / 40A (First half-cycle)
LED* • 50,000-hour LED life (50,000 hours to 70% intensity) • 40 Luxeon® Rebel LED emitters *See additional LED notes on page three
COLOR • Exclusive x7 Color System™ seven-color LED array • Beautifully illuminates skin tones and other objects for natural appearance and high color rendering • Broad-spectrum color interacts seamlessly with conventional sources • Exclusive optional red-shift option emulates tungsten dimming performance • Variable color temperature from 2700K-6500K
OPTICAL • Primary field angle of 22° and beam angle of 10.5° • Secondary lenses available for multiple beam-spread options • Additional lenses must be ordered separately • Refer to accessories charts for lenses available
CONTROL • DMX512 in and thru via five-pin XLR connectors • Multiple control options including RGB, strobe, and consolefree Master/Slave mode • See DMX control table for additional information • 15-bit virtual dimming engine provides smooth, high-quality theatrical fades and minimizes color shift during dimming • RDM functionality for address and setting changes
THERMAL • Ambient operating temperature of -4° to 104°F (-20° to 40°C) • Active electronic thermal management for droop-free operation • Noiseless, fan-free convection cooling for acoustically sensitive installations • Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing
ADDITIONAL ORDERING INFORMATION
Power Input Cables
Use information below to order 5’ power input leads with factory-fitted connectors
MODEL DESCRIPTION
- DPA-A 5’ PowerCon™ to parallel blade U-ground (Edison) connector
- DPA-B 5’ PowerCon to 20A two-pin and ground (stage pin) connector
- DPA-C 5’ PowerCon to grounded 20A twistlock connector
- DPA-X 5’ PowerCon to bare-end power input lead
Power Thru Jumpers
Note: Power thru jumpers connect to fixture’s output (thru) connector to provide link to successive fixtures
MODEL DESCRIPTION
- DPJ-5 5’ PowerCon to PowerCon™ fixture to fixture jumper
- DPJ-10 10’ PowerCon to PowerCon fixture to fixture jumper
Fixtures Accessories
MODEL DESCRIPTION
- SELD40FSY Yoke with floor-stand attachment
- 400BD Barn door (Use only as a flexible top hat to diminish aperture glare. Not for beam shaping)
- 407CF Color Frame (use for round and oblong lenses)
- 400L Egg Crate Louver
- 400PTH3 Top Hat 3” Tube
- 400PTH6 Top Hat 6” Tube
- 400PHH Half Hat 6” Tube
- 400CC C-Clamp (does not ship with fixture)
- 400SC Safety Cable (32”)
- DPSJ-25 25’ PowerCon to Edison input power cable with inline switch
ADDITIONAL ORDERING INFORMATION
Secondary Lens Options MODEL DESCRIPTION: The following lenses are cut for D40 fixtures and create round, linear or oblong field patterns as described below. These lenses are not sized for use in Selador Classic™ fixtures.
Narrow Linear Field Note: This is the same material as SeladorClassic lenses
- SELLVN-7.5 7.5” Very Narrow lens Linear lenses may be combined to create desired field size
- SELLN-7.5 7.5” Narrow lens
- SELLM-7.5 7.5” Medium lens
- SELLW-7.5 7.5” Wide lens
- SELLEW-7.5 7.5” Extra Wide lens
Round Field
- SELRVN-7.5 7.5” Very Narrow lens (round field)
- SELRN-7.5 7.5” Narrow lens (round field)
- SELRM-7.5 7.5” Medium lens (round field)
- SELRW-7.5 7.5” Wide lens (round field)
Oblong Field
- SELON-7.5 7.5” Narrow lens (oblong field)
- SELOM-7.5 7.5” Medium lens (oblong field)
- SELOW-7.5 7.5” Wide lens (oblong field)
NOTES ABOUT LED LUMINAIRES All LED sources experience some lessening of light output and some color shift over time. LED output will vary with thermal conditions. Thermal conditions can be affected by ambient temperatures and orientation. See the D40 Ambient Temperature and Power Budgeting Guide for more details. Based on the LED manufacturer’s B50 L70 specification, a Selador luminaire will achieve ~70% of its initial output after 50,000 hours of typical usage. In individual situations, LEDs will be used for different durations and at different levels. This can eventually lead to minor alterations in color performance, necessitating slight adjustments to presets, cues or programs.
CRI AND CQS RATINGS Desire fixtures were evaluated for CRI and CQS performance using measured output spectrum and optimized mix solutions for a best spectral match to black body sources at 3200K and 5600K.
All D40 luminaire versions provide excellent color rendering to the eye, particularly at higher color-temperature settings, such as 5600K. In most cases, the Duv is 0.000. A Duv rating of 0.000 indicates that the color mix used is exactly on the black body line, with no green or magenta tint.
CONTROL OPTIONS User settings on D40 fixtures allow multiple operational modes and settings for either console operation via DMX protocol or stand-alone operation. The expanded LCD display provides easy navigation to all possible settings and options. Some of the setting options are: • Multiple DMX choices ranging from a simple RGB profile – which effectively controls all seven LED colors via three channels – to nine-channel ‘direct’ color and intensity control • Multiple dimming curve options • Preset colors and sequences for stand-alone (no console required) operation • White point selection – white light and color behavior based on a specific color-temperature white light, i.e. 3200K, 5600K, etc. • Loss of data behavior options – instant off, hold last look for two minutes, etc. • Output modes – three output options that offer the user a choice between maximum output and maximum consistency See the user manual for a complete explanation of all of the control settings and options for the D40.
