Product Description
ETC D40XT Lustr+ IP66 Washlight, Black
ETC’s Desire Series D40XT puts the seven-color x7 system into a round theatrical wash light fully sealed and rated for IP66 outdoor use. The Selador® x7 Color System™ produces the widest range of spectrally-balanced saturated and tinted color choices available. The D40XT offers a rugged die-cast enclosure, noiseless fan-free operation, multiple lens options and advanced user interface. Its watertight construction makes it ideal for outdoor events and installations.
D40XT LED ARRAY OPTIONS D40XT fixtures are based on the x7 Color System that uses seven different LED colors to achieve true, usable broad-spectrum color. The D40XT luminaire is available with any one of the following x7 color arrays to best suit the intended application.
• D40XT Vivid™ – the x7 Color System array balanced for best all-around use as a color-changing wash fixture
• D40XT Lustr+™ – optimized with six colors plus high-intensity white LEDs to create an ideal front light wash fixture. Full range color, with an emphasis on lighter colors and white.
ORDERING INFORMATION
Selador D40XT
MODEL DESCRIPTION
- SELD40VO D40 Vivid wash fixture – for high-intensity color mixing across the spectrum for widest color wash use
- SELD40LO D40 Lustr+ front light wash fixture – optimized for skin tones and light tints for use as a theatrical front light
Note: D40XT luminaires ship with hanging yoke and attached leads equipped with watertight Molex power connectors and watertight DMX connectors. C-clamp, lenses or separate power lead are not included. Order DPA-M Bareend to Molex adaptors separately for XT luminaires if required.
GENERAL • 40 X 2.5W LED variable color-mixing light wash fixture • ETL listed to UL1573 – the standard for stage and studio lighting units • IP66-rated for exterior wet location use • Power and DMX in/thru connections for easy setup • User-friendly control interface with multiple modes and fixture settings
PHYSICAL • Rugged die-cast all-metal housing • Easy access slots for secondary lenses and standard 7.5” PAR accessories • Available in black (standard), white or silver (optional) or custom colors (contact factory) • Hanging yoke standard. Optional yoke/floor stand available • Effective Projected Area (EPA): 0.74
ELECTRICAL • 100VAC to 240VAC50/60 Hz universal power input • Waterproof, 39”power in and thru outdoor rated power leads • Up to nine fixtures (15A max) may be linked via power thru connector (ten fixtures total per circuit) when used with R20 Relay Module or Unison Echo Relay Panel. Consult breaker trip curves when used with other equipment • Requires power from a non-dim source • Inrush- - 120V: 15A (First half-cycle) - 240V: 40A (First half-cycle)
LED* • 50,000 hour LED life (50,000 hours to 70% intensity) • 40 Luxeon® Rebel 2.5W LED emitters *See additional LED notes on page three
COLOR • Exclusive x7 Color System™ seven-color LED array • Broad spectrum color interacts seamlessly with conventional sources • Beautifully illuminates skin tones and other objects for natural appearance and high color rendering • Exclusive red-shift option emulates tungsten dimming performance • Variable color temperature from 2700K-6500K
OPTICAL • Primary field angle of 17° and beam angle of 8° • Secondary lenses available for multiple beam spread options • Sealed, factory-installed lenses available for permanent installations (special order) • Lenses must be ordered separately • Refer to accessories chart for lenses available
CONTROL • DMX512 in and thru via watertight five-pin XLR connectors on 39” leads • Multiple control options including RGB, strobe, and consolefree Master/Slave mode • See DMX Control Table for additional information • 15-bit virtual dimming engine provides smooth, high quality theatrical fades and minimizes color shift during dimming • RDM functionality for address and setting changes
THERMAL • Ambient operating temperature of -4° to 104°F (-20° to 40°C) • Active electronic thermal management for droop-free operation • Noiseless, fan-free convection cooling for acoustically sensitive installations • Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing
ADDITIONAL ORDERING INFORMATION
Power Input Cables
Use information below to order 5’ power input leads with factory fitted connectors. Desire D40XT and D40XT Studio™ luminaires ship with 39” outdoor-rated power leads and integral watertight Molex connectors. Order optional DPA-M power cable to adapt to other input connectors
MODEL DESCRIPTION
- DPAM-5* XT Outdoor UL Power Lead – 1M Molex Female to bare end
- DPAM-25* XT Outdoor UL Power Lead-Long – 25’ Molex Female to bare end
- *Not included with fixture
Power Pass Thru
- DPJM-5 XT Outdoor UL 5’ Molex to Molex Extension
- DPJM-10 XT Outdoor UL 10’ Molex to Molex Extension
Fixtures Accessories
MODEL DESCRIPTION
- SELD40FSY Yoke with floor stand attachment
- 400BD* Barn door (Use only as a flexible top hat to diminish aperture glare. Not for beam shaping)
- 407CF* Color Frame (use for round and oblong lenses)
- 400L* Egg Crate Louver
- 400PTH3* Top Hat 3” Tube
- 400PTH6* Top Hat 6” Tube
- 400PHH* Half Hat 6” Tube
- 400CC C-Clamp (does not ship with fixture)
- 400SC Safety Cable (32”)
- *Note: Accessories are not intended for permanent installations
ADDITIONAL ORDERING INFORMATION
Secondary Lens Options
MODEL DESCRIPTION: The following lenses are cut for D40™ fixtures and create round, linear or oblong field patterns as described below. These lenses are not for use in Selador® Classic (Vivid™, Lustr®, Paletta™, etc.) fixtures.
Narrow Linear Field Note: This is the same material as Selador Classic lenses
- SELLVN-7.5 7.5” Very Narrow lens Linear lenses may be combined to create desired field size
- SELLN-7.5 7.5” Narrow lens
- SELLM-7.5 7.5” Medium lens
- SELLW-7.5 7.5” Wide lens
- SELLEW-7.5 7.5” Extra Wide lens
Round Field Any one of the following round lenses may be installed permanently in the fixture at the factory as a special order
- SELRVN-7.5 7.5” Very Narrow lens (round field)
- SELRN-7.5 7.5” Narrow lens (round field)
- SELRM-7.5 7.5” Medium lens (round field)
- SELRW-7.5 7.5” Wide lens (round field)
Oblong Field
- SELON-7.5 7.5” Narrow lens (oblong field)
- SELOM-7.5 7.5” Medium lens (oblong field)
- SELOW-7.5 7.5” Wide lens (oblong field)
NOTES ABOUT LED LUMINAIRES All LED sources experience some lessening of light output and some color shift over time. LED output will vary with thermal conditions. Thermal conditions can be effected by ambient temperatures and orientation. See the D40 Ambient Temperature and Power Budgeting Guide for more details. Based on the LED manufacturer’s B50 L70 specification, a Selador luminaire will achieve ~70% of its initial output after 50,000 hours of typical usage. In individual situations, LEDs will be used for different durations and at different levels. This can eventually lead to minor alterations in color performance, necessitating slight adjustment to presets, cues or programs
CONTROL OPTIONS User settings on D40XT fixtures allow multiple operational modes and settings for either console operation via DMX protocol or standalone operation. The expanded LCD display provides easy navigation to all possible settings and choices. Some of the setting options are: • Multiple DMX options ranging from a simple RGB profile – which effectively controls all seven LED colors via three channels – to nine-channel ‘direct’ color and intensity control • Multiple dimming curve options • Preset colors and sequences for stand-alone (no console required) operation • White point selection – white light and color behavior based on a specific color temperature white light, i.e. 3200K, 5600K, etc • Loss of data behavior options – instant off, hold last look for two minutes, etc. • Output modes – Three output options that offer the user a choice between maximum output and maximum consistency See the user manual for a complete explanation of all of the control settings and options for the D40XT.
