Product Description
ETC S-ACP SmartLink Architectural Control Processor, Repair
Part# 7180A1101
1. This is for the repair of an existing item. |
2. Once you place your order, then we will email you with an RMA# and shipping instructions so that you can ship your item out for repair. |
3. Please note that it may take up to 1-business day for us to send you the RMA# and shipping instructions. |
4. You will pay for the cost of outbound shipping on the repair. You can also decide the speed at which you want to ship the item out for repair. |
5. Please provide us with any technical notes about the issues that you are having with this product, so that they can be address during the repair of the unit. |
6. The repair will take approximately 1-2 weeks from the date of receipt of the item. |
7. The repaired unit will then be shipped back to you via the outbound shipping method that you select with this order. (Free, Ground, 2-Day, Overnight). |
8. Please call us at 1-866-457-5937 for any technical support questions. |
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
A member of ETC’s SmartLink family of plug-and-play lighting control and dimming products, the easy-to-use SmartLink Architectural Control Processor was designed for use with the Unison DRd dimming enclosure. Combined, the SmartLink and Unison DRd offer affordable control with a high-quality, modular dimming system, giving you everything you need to get the job done.
Please note the picture is for illustrative purposes only.
Applications
• Restaurants
• Retail Stores
• Schools
• House of Worship
• Meeting Rooms
Features
• Designed for use in Unison DRd rack enclosures
• Snapshot – connect a DMX input, or set levels locally and then save to the preset with the touch of a button.
• Plug and Play – ready to go out of the box, no software or external programming required
• Secure-it User Access – multiple levels of secure user access at the interface
• LinkConnect – Echelon’s LonTalk protocol with LinkPower, the two wire topology-free system gives you the freedom to put station where you need them
- up to 16 stations
- up to 500 meters of wiring per system
• QuickLoad – SD media support for upload, and backup of processor and DRd rack configuration data
• Point of Control interface – easy to read system display shows the user pertinent system information. Utilizes a numeric key pad, navigation touchwheel and buttons
• Support for up to 64 presets and one sequence
General
• UL and cUL LISTED
• CE marked
Specs
Mechanical
• Designed for use in DRd Rack Enclosure Series
• Microprocessor based, sold state technology to provide multi scene lighting
• Fully contained plug in assembly with no discrete wire connections
• Front panel user interface with backlit LCD
• Secure Digital (SD) removable media slot Functional
• Capacity
- Supports 512 channels of control
- Supports one physical DMX ports for data input and one DMX thru port for DMX data through to other devices
• Configuration Data
- Stored in non-volatile flash memory
- Ability to load to and from removable media (SD media)
• Local user Interface
- Access to Dimming enclosure setup and status
- Control for Channels, Presets, and Sequence
• Stations
- Connected to a SmartLink Processor via topology-free LinkConnect network
• Operation
- Support for 16-bit DMX attributes
- Supports ETC Dimmer Doubling
- Activate/ Deactivate presets
- Preset up, down, and hold times up to 60 minutes; 59 seconds
- Synchronized control of up to four enclosures using SmartLink control
Electrical
• No discrete wiring connections required for termination in a dimming enclosure
• One ESTA DMX512A input port
• Echelon LinkPower communications using topology-free, polarity independent station wiring. Wiring may be bus, loop, home-run, or any combination utilizing Belden type 8471 or equivalent, and (1) #14 ESD drain wire
• System configuration and programming information stored in flash memory
• UL and cUL LISTED, CE marked
Thermal
• Ambient room temperature: 0-40°C / 32-104°F
• Ambient humidity: 10-90% non-condensing