Product Description
ETC R20A Dual 20A Relay Module with Advanced Features, Repair
Part# 7050A1085
| 1. This is for the repair of an existing item. |
| 2. Once you place your order, then we will email you with an RMA# and shipping instructions so that you can ship your item out for repair. |
| 3. Please note that it may take up to 1-business day for us to send you the RMA# and shipping instructions. |
| 4. You will pay for the cost of outbound shipping on the repair. You can also decide the speed at which you want to ship the item out for repair. |
| 5. Please provide us with any technical notes about the issues that you are having with this product, so that they can be address during the repair of the unit. |
| 6. The repair will take approximately 1-2 weeks from the date of receipt of the item. |
| 7. The repaired unit will then be shipped back to you via the outbound shipping method that you select with this order. (Free, Ground, 2-Day, Overnight). |
| 8. Please call us at 1-866-457-5937 for any technical support questions. |
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The Relay Module is a dual, plug-in mechanical relay assembly for use in both Sensor + and Unison Dimming Series modular dimmer rack enclosures. Each Relay Module provides two electrically held relays, in the same form factor as standard dimmer modules. This enables designers to mix and match dimmer and relays for control of diverse loads. Ideal for control of non-dimmable load types such as HID lamps. Standard Relay Modules provide cost-effective switching while Advanced Features Relay Modules enable dimmer-specific feedback of load circuit data while performing switching in AF-capable Sensor+ dimmer enclosures.
APPLICATIONS
• High Intensity Discharge ballasts (Metal Halide and High Pressure Sodium)
• Non-dimmed On/Off loads
• Motors
• Power for fans and standard outlets
• Moving lights, fog machines and other powered effects
FEATURES
• Level-activated mechanical relays
• Two circuits per module
• High-density modular assembly
• Die-cast aluminum chassis
• Fully magnetic circuit breakers
GENERAL
• 100,000A Short Circuit Current Rating (SCCR)
• UL and cUL LISTED
SPECS
GENERAL
• UL and cUL Listed for continuous duty at 100% of rated load
- R15AF – 1.8kW
- R20AF – 2.4kW
PHYSICAL
• Modular plug-in assemblies
• Cast aluminum chassis, finished with textured epoxy paint
• Keyed to prevent insertion in inappropriately rated rack positions
CIRCUIT BREAKERS
• Fully magnetic to eliminate nuisance tripping
• 20x inrush current rating
• 125%, 10-120 seconds, must-trip rating
• Rated for 100% switching duty applications
ELECTRICAL RATINGS
• 100,000A Short Circuit Current Rating Rating (SCCR)
• Modules withstand hot-patching of cold loads up to full rating
• UL and cUL LISTED Relays
• 15 or 20 amp, level-activated mechanical relay
- Rated for 200,000 full load activations
- Rated for 5 million no load activations
• R15AF rated for 0.75HP at 13.8A
• R20AF rated for 1.50HP at 20.0A
• Rated for 20A General Purpose, 10A Tungsten and 1.5 HP Motor Maximum
POWER DEVICE
• Sealed, patented assembly
• Standard modules have one control LED per circuit
• Advanced Features modules have one control LED and one output LED per circuit
• Integral bonded heatsink
• Advanced Features modules have built-in voltage and current sensors Advanced Features*
• Advanced Features error messages:
- Load dropped below recorded value
- Load increased over recorded value
- SCR failed on/off
- Circuit breaker tripped
- Dimmer module removed
- Dimmer load absent
* All AF modules support ETC’s Advanced Features (AF) dimmer specific load reporting features when used in AF-equipped racks or packs
