Product Description
PLEASE CONTACT US AT 866-457-5937 FOR ALTERNATIVES
ETC EBI Echo BACnet Interface
Architectural installations utilize the BACnet building management protocol, for integration of HVAC, shades, A/V systems – and lighting. The Echo BACnet interface provides a simple-to-implement interface for Echo control systems to integrate with a BACnet IP capable system. With the BACnet Interface, Echo systems can receive commands, share occupancy and system status, and more. The Echo BACnet interface provides status for all Echo control points. Control commands can also be sent to the Echo system for building wide overrides and control, including presets, or placing a space into a timed event hold.
APPLICATIONS
• Sports venues
• Hospitality
• Healthcare facilities
• Conference and meeting rooms
• Lobby spaces
• Retail
• Education
FEATURES
• Reports real-time Echo system status to the BACnet system
• Reporting of all Echo control points are supported
• Integrates Echo lighting system into building-wide monitoring and management systems
• Accepts standard BACnet control commands
• PoE or 24VDC
GENERAL
• UL and cUL LISTED
• CE Marked
ORDERING INFORMATION
Product MODEL DESCRIPTION
- EBI Echo BACnet Interface
Mounting Accessories
MODEL DESCRIPTION
- ECHO-DIN Echo Low-Voltage DIN-Rail Cover Kit
- Echo Power Requirements EchoConnect: One unit of control power Auxiliary Power: 100mA*
- *Not required if using PoE
SPECS
FUNCTIONAL
• Integrates with any BACnet IP system
• Uses default BACnet commands
• Reports the status of the following to a BACnet system
- Zones
- Presets
- Space Occupancy
- Space Lockout
- Timed Event Hold
- Demand Response
• Allows a BACnet system to control the following
- Zones
- Presets
- Space Lockout
- Timed Event Hold
- Demand Response
MECHANICAL
• Intuitive four-button interface and onboard display for identification, status and configuration
• Din-rail mounting complies with DIN43880 (35/7.5 rail)
• Constructed of injection-molded, black ABS plastic
ELECTRICAL
• Supports PoE or 24VDC
• Compliant with IEEE 802.3i for 10BASE-T, 802.3u for 100BASE-TX and 802.3af for Power over Ethernet
• Connects to two-wire EchoConnect control networks through low-voltage Class 2 wiring
- Topology-free wiring over Belden 8471 or equivalent and one #14 ESD drain wire
- Two #16 AWG wires for 24VDC auxiliary power when required
- Supports optional use of Belden 1583A or equivalent Ethernet control wire when used with Cat5 termination accessories
- Wiring may be bus, loop, homerun or any combination of these
- Supports up to 500 meters (1,640 feet) of control wiring
- Up to 300 meters (1000 ft) using Cat5
• MicroSD card slot for firmware maintenance
• UL and cUL LISTED, CE Marked
REGULATORY AND COMPLIANCE
• UL and cUL Listed
• CE Marked
• RoHS compliance
• WEEE
THERMAL
• Ambient room temperature: 0-50°C / 32-122°F
• Ambient humidity: 5-95% non-condensing