Product Description
ETC DD Dimmer Doubler with Bare Ends
Designed to double the amount of dimmer circuits using existing wiring, the Dimmer Doubler with Bare Ends from ETC is ideal for users seeking to avoid construction, as well as touring shows that want to economize on connections. The aluminum encased Doubler uses Source Four fixtures with 77V HPL lamps and doubling software available in 120 VAC, 60 Hz Sensor and Unison dimmers, as well as ETC consoles. The Doubler is UL and cUL-approved for use throughout North America.
Features
- Doubles Dimmer Circuits
- Uses Existing Wiring
- 120 VAC, 60 Hz Operation
- Uses Source Four Fixtures
Design
Dimmer Doublers can double the number of dimmer circuits using existing wiring. Dimmer Doubling has UL and cUL approval for use throughout North America.
Applications
Easily increase dimmer circuit counts for renovations without additional construction Adds dimmer circuits to existing installations for specials or more complex lighting plots. Doubles the number of dimmer circuit for touring shows.
Specs
Material of Construction | Black-Finished Aluminum Case |
Connector | Bare Ends |
Voltage | Input: 120 VAC, 60 Hz Output: No DC Output |
DMX | Compatible |
Compatibility | Source Four Fixtures with 77 V HPL Lamps 120 VAC, 60 Hz Sensor and Unison Dimmers and ETC Consoles Not Compatible with ETC GFI Dimmer Modules |
Approvals and Certifications | UL and cUL Approval for Use Throughout North America |
Dimensions | 11 x 3.65 x 1.44" / 28 x 9.3 x 15 cm |