Product Description
ETC D20AF Dual 20A Dimmer Module 500µS'Advanced Features, Repair
Part# 7050A1004
| 1. This is for the repair of an existing item. |
| 2. Once you place your order, then we will email you with an RMA# and shipping instructions so that you can ship your item out for repair. |
| 3. Please note that it may take up to 1-business day for us to send you the RMA# and shipping instructions. |
| 4. You will pay for the cost of outbound shipping on the repair. You can also decide the speed at which you want to ship the item out for repair. |
| 5. Please provide us with any technical notes about the issues that you are having with this product, so that they can be address during the repair of the unit. |
| 6. The repair will take approximately 1-2 weeks from the date of receipt of the item. |
| 7. The repaired unit will then be shipped back to you via the outbound shipping method that you select with this order. (Free, Ground, 2-Day, Overnight). |
| 8. Please call us at 1-866-457-5937 for any technical support questions. |
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ETC D20AF Dual 20A Dimmer Module 500µS' Advanced Features
The Advanced Features (AF) Dimmer Module is designed for use in Sensor®+ Dimming Series modular rack enclosures. Advanced Features Dimmer Modules enable dimmer-specific feedback of load circuit data while performing digital phase angle dimming in AF-capable Sensor+ dimmer enclosures. The high-density, dimmer modules feature modular installation and removal, fully magnetic circuit breakers and enhanced risetime toroidal filters.
APPLICATIONS • Incandescent lighting • Low voltage lighting • Quartz lighting • Neon lighting • Cold Cathode lighting • 2-wire Fluorescent ballast • 4-wire Fluorescent ballast
FEATURES • Voltage, current, and temperature sensors in each dimmer • D15AF and D20AF modules are dual density • D50AF modules are single density • D100AF modules are half density • Dual back-to-back SCRs for each circuit • 500μS risetime toroidal filters • High-density modular assembly • Die-cast aluminum chassis • Fully magnetic circuit breakers
General • 100,000A Short Circuit Current Rating (SCCR) • UL and cUL LISTED
SPECIFICATIONS:
GENERAL • UL and cUL Listed for continuous duty at 100% of rated load • D15AF – 1.8kW • D20AF – 2.4kW • D50AF – 6.0kW • D100AF – 12.0kW
PHYSICAL • Modular plug-in assemblies • Cast aluminum chassis, finished with textured epoxy paint • Keyed to prevent insertion in inappropriately rated rack positions
CIRCUIT BREAKERS • Fully magnetic to eliminate nuisance tripping • 20x inrush current rating • 125%, 10-120 seconds, must-trip rating • Rated for 100% switching duty applications
RATINGS • 100,000A Short Circuit Current Rating (SCCR) • Modules withstand hot-patching of cold loads up to full rating
Power Device • Sealed, patented assembly • Field replaceable with screwdriver • Two back-to-back SCRs per circuit • One control LED and one output LED per circuit • Integral bonded heatsink • Integral temperature sensor • Built-in voltage and current sensors
FILTERING • High quality 500μS risetime* toroidal filters * Risetime measured at full load, at worst case firing angle (90 degrees), from 10-90% of output wave form
DIMMER RANGE • Incandescent, low voltage dimming range 100-0% • Dimming range of 2 and 4-wire fluorescent ballast is dependent on lamp ballast combination. Contact ETC for range verification • Sizing of Neon transformer used in dimming applications should be 1.5x greater than size used in non-dimming application
Advanced Features**
• Advanced Features error messages: - Load dropped below recorded value - Load increased over recorded value - DC on dimmer output - SCR failed on/off - Circuit breaker tripped - Dimmer module removed - Dimmer load absent
** All AF modules support ETC’s Advanced Features (AF) dimmer specific load reporting features when used in AF-equipped racks or packs
ORDERING INFORMATION
100-120 Volt Advanced Features Dimmer Modules
Model Description
- D15AF Dual 15A Dimmer Module, 500μS, Advanced Features
- D20AF Dual 20A Dimmer Module, 500μS, Advanced Features
- D50AF Single 50A Dimmer Module, 500μS, Advanced Features
- D100AF* Half 100A Dimmer Module, 500μS, Advanced Features
- *D100AF is a half-density, double-height module that takes two slots in the dimmer rack
Compatible Systems
Model Description
Installation Racks
- SR3 Sensor3 Installation racks
- SR+ Sensor+ Installation racks
- SR Sensor Installation racks
Touring Racks**
- SP3 Sensor+ 24 module Touring Rack (48-20A dimmers)
- SP+ Sensor+ 48 module Touring Rack (96-20A dimmers)
Portable Packs**
- SP3 Sensor3 Portable Packs
- SP+ Sensor+ Portable Packs
- ** Touring Racks and Portable Packs can be configured with D50AF and D100AF modules. Contact ETC for custom configurations.
