Product Description
ETC D15FB Single 15A Fluorescent/Battery Module, Repair
Part# 7050A1094
| 1. This is for the repair of an existing item. |
| 2. Once you place your order, then we will email you with an RMA# and shipping instructions so that you can ship your item out for repair. |
| 3. Please note that it may take up to 1-business day for us to send you the RMA# and shipping instructions. |
| 4. You will pay for the cost of outbound shipping on the repair. You can also decide the speed at which you want to ship the item out for repair. |
| 5. Please provide us with any technical notes about the issues that you are having with this product, so that they can be address during the repair of the unit. |
| 6. The repair will take approximately 1-2 weeks from the date of receipt of the item. |
| 7. The repaired unit will then be shipped back to you via the outbound shipping method that you select with this order. (Free, Ground, 2-Day, Overnight). |
| 8. Please call us at 1-866-457-5937 for any technical support questions. |
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The Fluorescent Battery Module is a single, plug-in dimmer with an additional constant-current output for use in both Sensor+ and Unison Dimming Series modular dimmer rack enclosures. The Fluorescent Battery Module provides one circuit of forward-phase angle dimming control for 2-wire dimming ballasts and one nondimmed power circuit for an integral emergency lighting battery pack located in remote fluorescent lighting fixtures.* Both circuit outputs are controlled under a single breaker for code compliance. The patented design features high-density, modular assembly, fully magnetic circuit breaker, and electronic low-end set controls.
Applications
• 2-wire fixtures with integral emergency battery pack
FEATURES
• One 1.8 or 2.4kW dimmer per module
• Modular assembly
• Die-cast aluminum chassis
• Fully magnetic circuit breakers
General
• 100,000A Short Circuit Current Rating (SCCR)
• UL and cUL LISTED
SPECS
GENERAL
• Single dimmable fluorescent circuit
• UL and cUL Listed for continuous duty at 100% of rated load
- D15FB – 1.8kW
- D20FB – 2.4kW
PHYSICAL
• Modular plug-in assemblies
• Cast aluminum chassis, finished with textured epoxy paint
• Keyed to prevent insertion in inappropriately rated rack positions
CIRCUIT BREAKERS
• Fully magnetic to eliminate nuisance tripping
• 20x inrush current rating
• 125%, 10-120 seconds, must-trip rating
• Rated for 100% switching duty applications Electrical
RATINGS
• 100,000A Short Circuit Current Rating (SCCR)
• Replaceable fuse on both the switched and the dimmed AC circuit for short circuit protection and fault current coordination
• Modules withstand hot-patching of cold loads up to full rating
• UL and cUL LISTED Power Device
• Sealed, patented assembly
• Field replaceable with screwdriver
• Two back-to-back SCRs per circuit
• One control LED per circuit
• Integral bonded heatsink
DIMMER RANGE
• Incandescent, low voltage dimming range 100-0%
• Dimming range of 2-wire fluorescent ballast is dependent on lamp ballast combination. Contact ETC for range verification
