Product Description
ETC ColorSource Par Pearl (CSPARPRL)
ColorSource PAR Pearl is a variable white-light LED wash fixture that utilizes a mix of two different white LEDs that enable a user to set the color temperature anywhere between 2700 K and 6500 K. The Pearl array includes the same great feature set and high quality construction as their full color siblings including an impressively bright output and simple user interface. Designed for installations that depend heavily on white light such as studios, houses of worship, and architectural installations, this array features flicker-free operation and an impressively smooth dimming curve.
APPLICATIONS • Houses of worship • Universities and schools • Studios • Hospitality • Retail • Exhibition centers • Meeting rooms • Clubs
PRODUCT FEATURES • Variable CT from 2700 K to 6500 K • Homogenized optics • Simple user interface with seven-segment display • powerCON in and thru • DMX/RDM in and thru (5-pin) • LED droop compensation • Optically calibrated • Tour-ready, aluminum housing
ColorSource PAR Pearl
MODEL DESCRIPTION
- CSPARPRL ColorSource PAR Pearl, black
- CSPARPRL45 ColorSource PAR Pearl RJ45, black
Note: ColorSource PAR Pearl luminaires ship with a hanging yoke and a power cable with connector of choice. C-clamps are not included. For addtional color options, please add the following: -1 for white, -5 for silver or -8 for custom color.
PRODUCT SPECIFICATIONS
Source
- LED details 40 Lumileds LUXEON® Z LEDs
- Max lumens 5,709
- Lumens per watt 50
- L70 rating (hours to 70% output) 36,000 hours (estimate pending testing data)
Color
- Colors used Warm white, cool white
- Color temperature range 2700 K- 6500 K
- Calibrated array Yes
- Red shift No
Optical
- Beam angle range 15 degrees
- Gate size N/A
- Aperture size 7.5in / 190mm
- Pattern projection No
- Pattern size N/A
- Camera flicker control/Hz range 1,200Hz (default) and 25,000Hz (via RDM)
- Notes Lenses are available for beam control. See accessories section below
Control
- Input method DMX-512 via 5-pin XLR or RJ45 connector
- Protocols DMX, RDM
- Modes (footprint) Variable color temperature: ICt (2) Direct: IWCS (4) 1 channel: I (1)
- RDM configuration Yes
- UI type 7-segment address display
- Local control Yes
- Onboard presets Yes (12)
- Onboard sequences No
- Onboard effects No
- Fixture to fixture control Yes
- Notes Local level control via UI
Electrical
- Voltage range 100V - 240VAC, 50/60Hz
- Input method powerCON in and thru
- Inrush 35A (first half-cycle) at 120V
- Fixtures per circuit 10 (20A switched circuit, R20 module or similar)
- Wattage (typical / standby) 114W / 1.6W at 120V
- Current draw 0.96A at 120V
Thermal
- Ambient operating temp 0-40° C (32-104° F)
- Fan (controllable) Yes (no)
- Droop compensation Yes
- dB range 24.8dBa average at 1m
- BTUs/hour 389
Physical
- Materials Die-cast aluminum and plastic
- Color options Black, white, silver or custom color
- Mounting options Yoke IP rating
- IP-20
- Weight 8.3lb (3.77kg)
- Included accessories Hanging yoke, power cable
- Notes See accessories list for power cable options
Warranty
- Full Fixture 5 years
- LED Array 10 years
ADDITIONAL ORDERING INFORMATION.
Secondary Lens Options
MODEL DESCRIPTION: The following lenses are cut for ColorSource PAR luminaires and create round, linear or oblong field patterns as described below. These lenses are not sized for use in Selador® Classic fixtures.
Narrow Linear Field Note: This is the same material as SeladorClassic lenses
- SELLVN-7.5 7.5” Very Narrow lens Linear lenses may be combined to create desired field size
- SELLN-7.5 7.5” Narrow lens
- SELLM-7.5 7.5” Medium lens
- SELLW-7.5 7.5” Wide lens
- SELLEW-7.5 7.5” Extra Wide lens Round Field
- SELRVN-7.5 7.5” Very Narrow lens (round field)
- SELRN-7.5 7.5” Narrow lens (round field)
- SELRM-7.5 7.5” Medium lens (round field)
- SELRW-7.5 7.5” Wide lens (round field) Oblong Field
- SELON-7.5 7.5” Narrow lens (oblong field)
- SELOM-7.5 7.5” Medium lens (oblong field)
- SELOW-7.5 7.5” Wide lens (oblong field)
NOTES ABOUT LED LUMINAIRES All LED sources experience some lessening of light output and some color shift over time. LED output will vary with thermal conditions. Thermal conditions can be affected by ambient temperatures and orientation. Based on the LED manufacturer’s B50 L70 specification, a ColorSource Pearl luminaire will achieve ~70% of its initial output after 36,000 hours of typical usage. In individual situations, LEDs will be used for different durations and at different levels. This can eventually lead to minor alterations in color performance, necessitating slight adjustments to presets, cues or programs.
ADDITIONAL ORDERING INFORMATION
Power Input Cables
Use information below to order 5’ power input leads with factory-fitted connectors.
MODEL DESCRIPTION
- DPA-A 5’ powerCON to parallel blade U-ground (Edison) connector
- DPA-B 5’ powerCON to 20A two-pin and ground (stage-pin) connector
- DPA-C 5’ powerCON to grounded 20A twistlock connector
- DPA-X 5’ powerCON to bare-end power input lead
Power-Thru Jumpers
Note: Power thru jumpers connect to luminaire’s output (thru) connector to provide link to successive luminaires
MODEL DESCRIPTION
- DPJ-5 5’ powerCON to powerCON fixture to fixture jumper
- DPJ-10 10’ powerCON to powerCON fixture to fixture jumper
Luminaire Accessories
MODEL DESCRIPTION
- CSPARFSY Yoke with floor-stand attachment
- 400BD Barn door (Use only as a flexible top hat to diminish aperture glare. Not for beam shaping)
- 407CF Color Frame (use for round and oblong lenses)
- 400L Egg Crate Louver
- 400PTH3 Top Hat 3” Tube
- 400PTH6 Top Hat 6” Tube
- 400PHH Half Hat 6” Tube
- 400CC C-Clamp (does not ship with fixture)
- 400SC Safety Cable (32”)
- DPSJ-25 25’ powerCON to Edison input power cable with inline switch