Product Description
ETC BSPS6WS 6 zone, wall mount, switched / dry contact input
LV Power Supplies BluesSystem LV power supplies provide precision power and control for BlueBeam and BlueDome fixtures. Available in a one-zone and six-zone version (up to 10 luminaires per zone) with wall-mount and rack-mount options, BluesSystem LV power supplies allow for maximum flexibility when designing your venue.
APPLICATIONS • For use with BluesSystem LV Fixtures
FEATURES • Configurable options for minimum light level and DMX loss behavior • One-zone version (up to 10 luminaires) available with: - Wall-mounting enclosure - Switched (dry contact) or DMX control input options • Six-zone version (up to 60 luminaires) available with: - Wall- or rack-mounting enclosure - Switched (dry contact), 0-10 V Analog or DMX control - input options
GENERAL • Three-year warranty • Ambient operating temperature 0–40° C / 32–104° F
REGULATORY AND COMPLIANCE • cETLus Listed • Conforms to ANSI/UL STD. 2108 • Certified to CSA STD. C22.2 No. 250.0 • CE Compliant
ORDERING INFORMATION
MODEL: BS FOR BLUDESSYSTEM
TYPE: PS FOR POWER SUPPLY
ZONES: 1 FOR 1-ZONE; 6 FOR 6-ZONE
MOUNT: W FOR WALLMOUNT; R FOR RACKMOUNT
CONTROL: S FOR SWITCHED; A FOR 0-10V ANALOG; D FOR DMX
SPECIFICATIONS
CONTROL • Each zone supports up to ten luminaires • One-zone power supply available with switched (LV dry contact) or DMX input • Six-zone power supply available with switched (LV dry contact), 0–10 V analog, or DMX input • Six-zone 0–10 V version features user selectable sink or source operation • Configurable minimum light level and DMX loss behavior options • Three-conductor screw terminal for DMX in/thru.
ELECTRICAL • Power supply input operating voltage: 100–240 VAC 50/60 Hz • One-zone power supplies provide 24 VDC output • Six-zone power supplies provide 36 VDC output • 3 W luminaire consumes 85 mA @ 36 V (130 mA @ 24 V) • Three conductor screw terminals for output zones accepting 30-12 AWG / 0.05–4.0 mm2 gauge cable
MECHANICAL • One-zone power supply available as wall-mount only • Six-zone available in wall-mount or 19” 2U rack-mount • Suitable for dry locations only
THERMAL • Low heat generation
ACCESSORIES - DSDM1 - DIMMING MODULE
The DM1 dimming module allows basic instensity control of up to 40 BlueBeam or BlueDome LV fixtures. The module is designed to be installed into an electrical faceplate or panel of your choosing and features the same three terminal connections as the fixtures (power, ground, control) for ease of commissioning. See BluesSystem installation guide for further information on wiring configuration options.
MAXIMUM CABLE DISTANCES BluesSystem LV beams and domes can be wired using standard, three conductor cable. The maximum distance from power supply to fixture varies based on the gauge of cable used. The following charts provide information on the maximum distance for a variety of common cable sizes. It is possible to increase perminssable cable distance by running a double ground conductor - e.g. A four-conductor 18AWG cable such as Belden 8489 could be installed with two of the conductors used for the ground termination. This ‘double ground’ connection allows for a greatly increased cable distance
24v ONE-ZONE POWER SUPPLY
AWG | MAX FT USING SINGLE GROUND | MAX FT USING DOUBLE GROUND |
12 | 396 | 792 |
2.5 mm2 | 307 | 614 |
14 | 249 | 498 |
16 | 157 | 313 |
18 | 99 | 197 |
36V SIX-ZONE POWER SUPPLY
AWG | MAX FT USING SINGLE GROUND | MAX FT USING DOUBLE GROUND |
12 | 594 | 1,188 |
2.5 mm2 | 460 | 920 |
14 | 374 | 747 |
16 | 235 | 470 |
18 | 147 | 296 |
Other Details
Warranty Coverage. ETC WILL ONLY BE OBLIGATED TO HONOR THE WARRANTY SET OUT BELOW UPON RECEIPT OF FULL PAYMENT OF THE ORDER. Electronic Theatre Controls, Inc. (“ETC”) warrants to the original owner or retail customer (“Customer”) that during the warranty period defined below, ETC will repair or replace its Products that are defective in materials or workmanship which cause the Product to fail to operate in accordance with ETC’s published specifications for the Product in effect as of the date of shipment, subject to the terms of this limited warranty. The warranty period of box Products shall begin on the date of shipment (“Warranty Start Date”), except the Warranty State Date shall begin on the date of energization for Orders which include energization performed by ETC or an authorized service provider acting on ETC’s behalf. If no energization date is recorded, however, the Warranty State Date shall begin on the date of shipment. The controlling warranty, terms and conditions, and product warranty periods is available at the time of order acknowledgment, either by hard copy or by the PDF document found via the internet link listed on the order acknowledgment as of the date of the order acknowledgment. If ETC shall fail to repair or replace defective Products within a reasonable time after they are returned to ETC, or if ETC shall wrongfully fail to make delivery or shall wrongfully repudiate this contract, then Customer shall be entitled to recover from ETC such part of the purchase price as has been paid by Customer to ETC. The remedy stated in the preceding sentence shall be Customer’s exclusive remedy for any breach, non-delivery, or repudiation by ETC or for any other liability of ETC to Customer. This exclusive remedy shall not be deemed to have failed its essential purpose so long as ETC is willing and able to repair or replace defective Products in the prescribed manner. Warranty Exclusions. This Warranty does not impose any liability or duty upon ETC for: (i) any Product or part of a Product damaged by or subject to accident, negligence, alteration, abuse or misuse by Customer, or any accessories or parts not supplied by ETC; (ii) any damage caused by the unauthorized adjustment, repair or service of the Products by anyone other than ETC or its authorized repair agents; (iii) any damage, to any Product, or part of a Product caused by or due to an act of God, any catastrophe resulting from earthquake, fire, flood, explosion, inability to obtain materials or utilities, or any other cause beyond the reasonable control of ETC. This warranty also does not cover “consumable” parts such as fuses, lamps, color media or components which may be warranted directly to the Customer by the original manufacturer. This Warranty does not extend to items not manufactured by ETC. Freight terms on warranty repairs are FOB ETC factory or designated repair facility. Collect shipments or freight allowances will not be accepted. ELECTRONIC THEATRE CONTROLS, INC.’S STANDARD TERMS AND CONDITIONS OF SALE AND WARRANTY Rev. 6/25/2019 Page 3 of 3 ETC’s sole responsibility under this Warranty shall be to repair or replace at ETC’s option such Products or parts of Products as shall be determined to be defective on ETC’s inspection. ETC, at its option, may perform on-site warranty repairs. If ETC chooses to replace the Product and is not able to do so because it has been discontinued or is not available, ETC may replace it with a comparable product. ETC reserves the right to use new, re-worked, repaired, or refurbished parts in the repair or replacement of any Product covered by this Warranty. ETC will not assume any responsibility for any labor expended or materials used to repair any Products without ETC’s prior written authorization. ETC SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL, GENERAL OR CONSEQUENTIAL DAMAGES, DAMAGES TO PROPERTY, DAMAGES FOR LOSS OF USE, TIME, PROFITS OR INCOME, OR ANY OTHER DAMAGES. The Customer’s obligations during the warranty period under this Warranty are to notify ETC within one week of any suspected defect and to return the Products prepaid to ETC at ETC’s factory or authorized service center. The one week notice period does not apply to claims for shortage or damaged Products. This written Warranty is intended as a complete and exclusive statement of the terms thereof. Prior dealings or trade usage shall not be relevant to modify, explain or vary this Warranty. Acceptance of, or acquiescing in, a course of performance under this Warranty shall not modify the meaning of this Warranty even though either party has knowledge of the performance and a chance to object. THIS LIMITED WARRANTY IS THE ONLY WARRANTY APPLICABLE TO THE EQUIPMENT AND REPLACES ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SPECIFICALLY, EXCEPT AS PROVIDED HEREIN, ETC UNDERTAKES NO RESPONSIBILITY FOR THE QUALITY OF THE PRODUCT OR THAT THE PRODUCT WILL BE FIT FOR ANY PARTICULAR PURPOSE FOR WHICH CUSTOMER MAY BE BUYING THE PRODUCT. ANY IMPLIED WARRANTY IS LIMITED IN DURATION TO THE WARRANTY PERIOD. NO ORAL OR WRITTEN INFORMATION, OR ADVICE GIVEN BY ETC, IT’S AGENTS OR EMPLOYEES, SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS LIMITED WARRANTY. United States, Latin American, and Canadian Dealers: ETC Products forwarded outside of the United States, Latin America and/or Canada will only be covered by the Warranty Statement applicable to the region in question, and therefore this Warranty may or may not apply. Please contact ETC for the applicable warranty statement.
Product Videos