Product Description
ETC P-ACP Paradigm Architectural Control Processor, Repair
Part# 7180A1009
| 1. This is for the repair of an existing item. |
| 2. Once you place your order, then we will email you with an RMA# and shipping instructions so that you can ship your item out for repair. |
| 3. Please note that it may take up to 1-business day for us to send you the RMA# and shipping instructions. |
| 4. You will pay for the cost of outbound shipping on the repair. You can also decide the speed at which you want to ship the item out for repair. |
| 5. Please provide us with any technical notes about the issues that you are having with this product, so that they can be address during the repair of the unit. |
| 6. The repair will take approximately 1-2 weeks from the date of receipt of the item. |
| 7. The repaired unit will then be shipped back to you via the outbound shipping method that you select with this order. (Free, Ground, 2-Day, Overnight). |
| 8. Please call us at 1-866-457-5937 for any technical support questions. |
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The Paradigm Architectural Control Processor is designed for easy interaction and rapid response. The Paradigm ACP’s built-in memory and processing power works with vast amounts of lighting control data and is fast enough to process 1,024 simultaneous fades over any of its native protocols.
APPLICATIONS
• Houses of worship
• Schools
• Restaurants
• Hotels
• Museums
• Casinos
• Ballrooms
FEATURES
• Designed for use in Unison DRd and ERn enclosures
• Point of Control Interface: easy-to-read system display shows the user pertinent system information
• Supports Calculated Energy Reporting for configured loads when used in a Central Control Server System.
• LinkConnect: using Echelon LonTalk protocol with LinkPower, the two-wire topology-free system gives you the freedom to put stations where you need them
• NetConnect: Makes use of low-cost, easy-to-install Cat5/5e with PoE to connect touchscreen stations and other devices to a networked Paradigm System
• USBConnect: support for USB flashdrives for configuration upload and download
• QuickLoad: SD Media support for upload, and backup of configuration data
• LightDesigner Access: Web browser interface for easy modification, activation and monitoring of your system configuration and status
• LocalAccess: user control at the interface, including creation of timed events and editing of presets or sequences
• Secure-It Access Control: multiple levels of secure user access at the interface
REGULATORY AND COMPLIANCE
• cULus Listed
• CE Compliant
SPECS
MECHANICAL
• Designed for use in the Unison DRd Rack Enclosure Series and Unison ERn Control Enclosure Series
• Microprocessor-based, solid-state technology to provide multi-scene lighting and building controls
• Fully-contained plug-in module with no discrete wire connections
• Tool-free installation
• Front-panel user interface with backlit LCD and alphanumeric button panel
• Support of RJ-45 Ethernet, Secure Digital (SD) and Universal Serial Bus (USB) media on the front panel
ELECTRICAL
• No discrete wiring connections required for use in a dimming or control enclosure
• Echelon LinkPower communications with remote devices, including button stations, button/fader stations, touchscreen stations, sensors, and third party LonMARK compliant products
• Hot swapable
• System configuration and programming information stored in flash memory
• Support of ESTA BSR E1.17 Advanced Control Networks (ACN) and ESTA BSR E1.31 (sACN) Protocols
• Supports EIA-RS232 serial protocol for bi-directional command and communication with third-party equipment
• Two discrete ESTA DMX512A ports, configurable as input or output ports*
• Four dry-contact closure inputs
• Four contact-closure outputs, rated 1 A at30 VDC
THERMAL
• Ambient room temperature: 0°–40° C / 32°–104° F
• Ambient humidity: 10–90% non-condensing
* When used in a Dimming Enclosure, the second DMX port is always an output
FUNCTIONAL
• Capacity
- Supports 1,024 channels of control per control processor
- Supports up to 63 stations per control processor
• System
- Net3 system interoperability including sACN
- Network Time Protocol for real-time clock synchronization supporting real and astronomical events
- Supports two physical DMX ports, each configurable as an input or output
- Provides configuration of DRd dimming operations
- Up to 12 control processors per system
- Addition of processors to a system proportionately increases the overall capacities
• Serial Input/Output
- Eight-bit word length, parity selection and one or two stop bits
- Fully customizable input and output messages
- Bi-directional
• Configuration Data
- Remote upload from a connected PC running LightDesigner or another connected Paradigm ACP
- Stored in removable solid-state memory for easy transfer to another Paradigm ACP
• Local User Interface
- Control functionality for control channels, zones, fixtures, groups, presets, macros, walls and sequences
- Ability to schedule timed events (add/edit/delete)
- Transfer of configuration using removable media
- Transfer of configuration to and from touchscreen stations using removable media
• User Access Controls
- Two user accounts
– Administrator and User, local to each processor
• Web User Interface
- Internal web server accessible via Ethernet port
- Activate and deactivate presets
- Schedule timed events (add/edit/delete)
- Displays status information and log files
- Configuration of processor settings
- Supports configurable user login security options
• Diagnostics
- Standard and Critical Event logging
• Stations
- Connected to a Paradigm processor via topology-free LinkConnect, or star-topology NetConnect
- Discovery and binding accomplished from the local user interface or LightDesigner
• Operation
- Configurable DMX output refresh rate
- Support for 16-bit DMX attributes
- User configurable arbitration for multiple internal and external source data
