Product Description
Enttec 73548 Pixie Driver 24V - Power and Control Driver for LED Pixel Devices (130W Max)
Product Overview
The Pixie Driver comes loaded with a scrolling rainbow demo sequence which will run and loop every time you power the unit up so you can get your installation tested straight away once you connect your LED pixel strips.
When any valid data is fed through the DMX or USB ports it will override the demo playback sequence and keep listen-ing to the data ports until you re-power the unit.
If you do not want the Pixie driver to generate any output when powered up, it can be done by erasing the pre-loaded show or overwriting it with your own as further described in the ENTTEC PRO Manager software section.
Product Features
- Drives 2 DMX universes worth of 5 Volt Pixel Tape/Dots or 12/24V Pixel Tape/Dots (model dependent).
- In-Built 24V DC power supply with 65 and 130 watts output power units available (pn: 73547 [Legacy Product] and 73548)
- Enhanced data outputs with surge protections
- D3 is a duplicated output of D1 for backup
- D4 is a duplicated output of D2 for backup
- 55W and 65W drivers can individually control and power up to 300 RGB pixel LEDs
- 110W and 130W drivers can individually control and power up to 600 RGB pixel LEDs
- Smart thermal management
- DMX512 Controllable and USB configurable
- Supports RGB and RGBW pixel tape
- Quick 2 steps test installation: connect your pixel strips to the screw terminal output and plug mains cable to a wall outlet. It is that easy!
- Standalone test output sequences (no external data required)
- Show record and playback (Art-Net to USB using PRO-Manager App)
- Power and output status LED indicators
- High quality powder coated metal box
- Scalable design for large projects
- Up to 8 units stackable using standard 19" modular rack accessory (sold separately)
- Standard IEC mains and 5Pin-XLR DMX input connectors
- Plug-unplug screw terminal output connector
- Automatic multi voltage mains input (110-250V AC)
Product Specifications
- Input Voltage: 90 - 264V AC
- Input Frequency: 47 - 63Hz
- Maximum Total Output Power: 55W and 110W versions (5V) 65W and 130W versions (12/24V)
- Latency: 5 milliseconds
- Maximum Current per source (VCC or VCC0): 11 Amps
- Maximum Current per Pin (Screw Terminal): 10 Amps
- Data Output Type: Multiple protocols supported
- Control Input: DMX512
- Show Recording: From Art-Net using Pro Manager software (usb connection required)
- Show upload: Through USB port
- Cooling Method: Smart Fan (revB onwards)
- Operating Ambient Temperature: 0 - 40° C
- Connectors: 2x 5-Pin Male XLR for DMX input, 1x Double layer 6-Pin screw terminal, 1x 3-Pin IEC C14 Male Socket 10Amps
- IP Rating: IP20
- Unit Weight: 0.96 kg
- Shipped Weight: 1.389 kg
