Product Description

Dynacord IPX10:8 Multi-Channel Installation DSP Amplifier with Digital PFC Supply, 8x1250W

Overview

From stadiums and arenas, to houses of worship and concert halls, the IPX series from Dynacord delivers high-power, multi channel amplification for fixed install applications with the added touch of sophisticated speaker processing. Featuring smart Eco Mode, digitally controlled interleaved PFC supply, comprehensive fallback options, and integrated DSP, the IPX series can run in 48 kHz or true 96 kHz (including FIR Drive). Operate each channel individually in low impedance mode or 70 V/ 100 V Direct Drive Mode, or bridge to 140 V/ 200 V Direct Drive for greater expansion to drive all kinds of loudspeakers. Besides analog inputs, Dante, and OCA via OMNEO, network inputs are available. Fully integrated with IRIS-NET, local control and supervision are simple with the front panel OLED display. The IPX Series streamlines the needs of your fixed install system.

Features

• 8 x 1250 W multi-channel installation DSP amplifier with digitally controlled PFC supply.
• Fully integrated DSP with high-resolution 96 kHz processing and FIR Drive.
• Dante and OCA integration via OMNEO with fallback options.
• Parallel, bridged and parallel-bridged drive modes with 70/100V/140V/200V and low impedance operation
• High efficiency Eco Rail technology for lower operating costs

Includes

• IPX series DSP power amplifier
• (2) 8-pin Euroblock-type connector, Output, 6 mm
• (4) 6-pin Euroblock-type connector, Input
• 8-pin Euroblock-type connector, GPIO
• (4) M6x20 screw for rack mounting
• Installation manual
• Mains power connector, 32 A with safety & assembly instruction
• Safety instruction booklet

Specifications

• AMPLIFIER
  • Number of Channels: 8
  • Max. Output Voltage: 150 V peak
  • Max. Output Current: 41 A peak
  • Voltage Gain
    • Low-Z mode, ref.1 kHz: 32.0 dB, adjustable 20.0-44.0 dB
    • Direct Drive mode: 33.2/36.2/39.2/42.2 dB for 70/100/140/200 V
  • Input Sensitivity
    • Low-Z mode, Max. Output Voltage: 10.7 dBu (2.66 V), adjustable -1.3-22.7 dBu
    • Direct Drive mode: 6 dBu (1.55 V), fixed
  • THD (3 dB below max, AES17, 1 kHz): < 0.05 %
  • DIM 100 (3.15 kHz, 15 kHz): < 0.15 %
  • IMD-SMPTE (60 Hz, 7 kHz): < 0.05 %
  • Crosstalk (ref. 1 kHz, 12 dB below Max, 8 Ω): < -80 dB
  • Frequency Response (ref. 1 kHz, analog in to speaker out): 20 Hz to 20 kHz (±0.5 dB)
  • Damping Factor (20 Hz to 200 Hz, 8 Ω): > 400
  • Output Stage Topology: Class D, fixed frequency
  • Signal to Noise Ratio Amplifier:
    • A-weighted, analog input 112 dB
    • A-weighted, digital input 115 dB
  • Output Noise:
  • A-weighted, analog input < -70 dBu
  • A-weighted, digital input < -73 dBu
• CONNECTIVITY
  • Analog Audio Input/Thru
  • Type: 4 x 6-pin Euroblock, male
  • Maximum Input Level: +21 dBu
  • Input Impedance, active balanced: 20 kΩ
  • Reference level equal to digital input: +21 dBu for 0 dBFS
  • Speaker Output: 2 x 8-pin Euroblock, 6 mm, female
• GENERAL
  • Power Consumption
    • Rated power consumption (see BTU table): 1300 W
    • 1/8 Maximum Output Power at 4 Ω: 1780 W
    • Idle Mode (no input signal): 105 W
    • Standby Mode: < 18 W
  • Dimensions (W x H x D): 48.3 x 8.81 x 51.42 cm (19.01 x 3.47 x 20.24 in)
  • Weight: 16.8 kg (37.1 lb)
  • Shipping Weight: 19.1 kg (42.1 lb)