Product Description
Dynacord DC-PM600-3-MIG 8‑Channel Compact Power‑Mixer
The PowerMate compact power mixers incorporate profound know-how, based on our research, development and inter-communication with our customers in the professional audio market, for decades.
It incorporates not less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equalizer, USB audio interface and power amplifier. Each of them is on the highest quality level as you would expect from a stand-alone device. The PowerMate is a real all-rounder for almost all applications with maximum feature set at minimum size.
The mixing section starts with 6 lowest noise, discrete microphone preamps. 3 auxiliary busses, one of them switchable pre/post fader, allow high flexibility for monitoring. The two effects processors offer 100 factory presets, including the already legendary PowerMate-reverbs. Further, each preset can be edited and stored to 20 User memories.
The built in USB audio interface shares 4 playback and 4 recording channels simultaneously with a PC or Mac, following studio standard 24-bit / 96 kHz. An additional MIDI interface allows integration of instruments, such as keyboards. A license for Steinbergs Cubase software is part of the package.
The 9 band stereo graphic equalizer allows precise tone control for speakers and room matching.
The amplifier is extremely powerful with 2 x 1000 W / 4 Ohms (RMS). Due to modern switching mode power supply technology and a class-D output stage, it’s very efficient and lightweight, too. An optional speaker protection allows limitation of long-term power without giving up dynamics.
Finally, the slim housing is protected by a rugged plastic lid, hold by strong snap in magnets.
Features
- Mixer with 8 input channels (4 Mic/Line + 2 Mic/Stereo-USB + 2 Stereo-Line)
- Very powerful and reliable amplifier with 2 x 1.000 Watts / 4 Ohms
- 2 High-Quality editable effects, 100 factory and 20 user presets
- Professional 4x4 24-bit / 96 kHz USB interface with MIDI
- Lightweight (9.5 kg) road-ready package with extra robust cover-lid
Specs
|
Channels (Mono + Stereo) |
4 + 4 |
|
Microphone Inputs (XLR) |
6 |
|
Auxiliarys (MON, FX, AUX) |
1 Pre, 1 Post, 1 Pre/Post switchable |
|
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A |
|
|
into 2.66 Ω |
2 x 1600 W |
|
into 4 Ω |
2 x 1250 W |
|
into 8 Ω |
2 x 675 W |
|
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1% |
|
|
into 2.66 Ω |
2 x 1350 W |
|
into 4 Ω |
2 x 1150 W |
|
into 8 Ω |
2 x 650 W |
|
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel |
|
|
into 2.66 Ω |
2 x 1350 W |
|
into 4 Ω |
2 x 1000 W |
|
into 8 Ω |
2 x 600 W |
|
Rated Output Power, 20 Hz to 20 kHz, THD < 0.5%, Single Channel |
|
|
into 4 Ω |
2 x 900 W |
|
into 8 Ω |
2 x 450 W |
|
Maximum Output Voltage, of power amplifier, 1 kHz, no load |
74 Vrms |
|
THD, at 1 kHz, MBW = 80 kHz |
|
|
MIC input to Master A L/R outputs, +16 dBu, typical |
< 0.005% |
|
POWER AMP INPUTS to Speaker L/R outputs |
< 0.075% |
|
DIM 30, power amplifier, 3.15 kHz, 15 kHz |
< 0.05% |
|
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz |
< 0.15% |
|
Frequency Response, -3 dB, ref. 1 kHz |
|
|
Any input to any Mixer output |
15 Hz to 70 kHz |
|
Any input to Speaker L/R output |
20 Hz to 30 kHz |
|
Crosstalk, 1 kHz |
|
|
Amplifier L/R |
< -85 dB |
|
Channel to Channel |
< -80 dB |
|
Mute- & Standby-Switch attenuation |
> 100 dB |
|
Fader & FX/AUX/MON-Send attenuation |
> 85 dB |
|
CMRR, MIC input, 1 kHz |
> 80 dB |
|
Input Sensitivity, all level controls in max. position |
|
|
MIC |
-74 dBu (155 µV) |
|
LINE (Mono) |
-54 dBu (1.55 mV) |
|
LINE (Stereo) |
-34 dBu (15.5 mV) |
|
CD (Stereo) |
-34 dBu (15.5 mV) |
|
POWER AMP INPUTS |
+8 dBu (1.95 V) |
|
Maximum Level, mixing desk |
|
|
MIC inputs |
+11 dBu |
|
Mono Line inputs |
+31 dBu |
|
Stereo Line inputs |
+31 dBu |
|
All other inputs |
+22 dBu |
|
All other outputs |
+22 dBu |
|
Input Impedances |
|
|
MIC |
2 ㏀ |
|
CD In |
10 ㏀ |
|
All other inputs |
> 15 ㏀ |
|
Output Impedances |
|
|
Phones |
47 Ω |
|
All other outputs (balanced/unbalanced) |
150 Ω / 75 Ω |
|
Equivalent Input Noise, MIC input, A-weighted, 150 ohms |
-130 dBu |
|
Noise, Channel inputs to Master A L/R outputs, A-weighted |
|
|
Master fader down |
-100 dBu |
|
Master fader 0 dB, Channel fader down |
-92 dBu |
|
Master fader 0 dB, Channel fader 0 dB, Channel gain unity |
-82 dBu |
|
Signal/Noise-Ratio, power amplifier, A-weighted, 4 Ω |
105 dB |
|
Output Stage Topology, amplifier |
Class D |
|
Equalization |
|
|
LO Shelving |
±15 dB / 60 Hz |
|
MID Peaking |
±12 dB / 2.4 kHz |
|
HI Shelving |
±15 dB / 12 kHz |
|
Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz) |
±10 dB / Q = 1.5 to 2.5 |
|
Filter |
|
|
LO-CUT, mono inputs |
f = 80 Hz, 18 dB/oct., switchable |
|
Speaker Processing |
LPN, switchable |
|
Effects |
|
|
Type |
2 x Stereo 24/48-bit multi effects processors |
|
Effects presets |
100 Factory + 20 User, Tap-Delay |
|
Remote control |
Footswitch, MIDI |
|
Display |
128 x 64 pixels, OLED |
|
Digital Audio Interface |
|
|
Channels |
4 In / 4 Out |
|
AD/DA Conversion |
24-bit |
|
Sampling Rate |
44.1 / 48 / 88.2 / 96 kHz |
|
PC Interface |
USB2.0, Female Type B |
|
Peak Display |
6 dB before Clip |
|
MIDI Interface |
5-pin DIN connector, In / Out |
|
Output Power Control (Speaker Protection) |
Adjustable longterm RMS Limiter |
|
Protection |
|
|
Mixer Outputs, relay controlled |
AUX, MON, MASTER A L/R |
|
Amplifier |
Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF |
|
Switching Mode Power Supply (µC controlled) |
Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature |
|
Cooling |
Continuous speed controlled Fans |
|
Phantom Power, switchable |
48 V DC |
|
Power Requirements (SMPS with auto range mains input) |
100 V to 240 V AC, 50 Hz to 60 Hz |
|
Power Consumption, at 1/8 maximum output power, 4 Ω |
450 W |
|
Safety Class |
I |
|
Ambient Temperature Limits |
+5 °C to +40 °C (40 °F to 105 °F) |
|
Dimensions (W x H x D), mm |
With lid: 438.8 x 161.7 x 362.5 Rack-mount: 483 x 135.8 x 310.3 (7 HU) |
|
Weight |
|
|
Net Weight, without lid |
9.0 kg |
|
Net Weight, with lid |
9.5 kg |
|
Shipping Weight |
12 kg |
|
Warranty |
36 months |
|
Optional Accessories |
|
|
Rack Mount Kit |
F01U214880 (DC-RMK-600-3) |
|
FS 11 (Footswitch with LED) |
F01U100598 (DC-FS11) |
|
Carrying bag |
F01U259014 (DC-BAG-600PM) |
