Product Description

Dove Systems MTX-DE8-WM 8 Channel, DMX to 0-10V Analog Converter, Wall Mount

8 Channel DMX to Analog Interface

The MTX-DE8-WM decodes signals from DMX control desks to analog dimmers, LED, and fluorescent lighting fixtures whose drivers / ballasts accept 0 to +10VDC dimming control. It is used to integrate controllers into theatrical or television lighting systems. The decoder is mounted on a wall, and each driver is connected to one of eight channels on the internal terminal strip. Up to 64 decoders may be chained together for systems of up to 512 fixtures. A thumbwheel switch on the front panel selects the starting channel, and an LED indicates presence of the DMX signal.

For drivers that don’t dim all the way to off, there are on/off options to enable switching power to the drivers. Outputs can be configured for all analog or 1, 2, or 4 on/off outputs. All controlling analog channels must be set to zero for the on/off output to be 0 instead of 10 Volts.

Also available as the MTX-DE8-WMH, the Highest Takes Precedence (HTP) Output version has source-only outputs allowing multiple 0-10V outputs to be wired together controlling 0-10V devices. This enables system configurations that allow for basic light control without booting up the DMX control console.

Features

• Compatible with USITT DMX-512

• Standard 0 to +10VDC output

• HTP Output option available

• Eight channels, 20mA per channel

• Terminal strip outputs

• 0.4 second turn-off delay for on/off outputs protects power switch and load

• Thumbwheel starting channel select switch

• DMX in and out

• DMX termination switch

• Load test function

• Wall mount (screws not included)

• 100-277VAC 50/60Hz 25mA power input

• Dim. 9.25" X 3.20" X 3.00"

• Wt. 1.5 pounds

• One year warranty