Product Description
Doug Fleenor Design E1REL20A-JBOX 1-Channel Ethernet Relay Pack in Junction Box
The E1REL20A-JBOX and E1REL20A-2POLE-JBOX use ArtNet and sACN (E1.31) Ethernet protocols for control of a relay. They can switch up to a 20 amp line voltage load and are built with a 30 amp relay for robust performance.
Doug Fleenor Design relay packs use dry contact air-gap relays. These relays have advantages and disadvantages over the solid state relays found in dimmer packs. Solid state relays can be switched on and off rapidly with no wear, but tend to leak current even when in the off position. Air-gap relays do not leak current, but due to their mechanical design have a finite life span. Doug Fleenor Design relay packs should be used where a true off condition is required (no voltage, no current). They should not be used in applications where they will be turned on and off rapidly (for example in chase lights). Ideal applications include fog machines, power to moving light fixtures, motorized disco effects, strobe lights, fans, and removing power from fixtures that are not able to dim to zero.
Please note the picture is for illustrative purposes only. Product may appear different.
Specs
Certification: ETL Listed to the UL 508 standard
Input signal: E1.31 sACN and ArtNet
Input circuit: 100BASE-TX Fast Ethernet, Crossover Detection
Input connector: Neutrik Ethercon
Power input: 100 to 240 Volts, 50/60 hertz, 4 watts (plus load)
Power wiring: 10mm Euro Strip UL 30a-450 Volt M3 Screw terminal block
Power output: Input power is switched to output
Output rating: 20 amps
Output device:
- Omron G8P
- Mechanical life: 10,000,000 operations minimum
- Electrical life: 250,000 operations minimum at 5 Amps
- 125,000 operations minimum at 20 Amps
Environmental: 0-40° C (32-104° F), 10-90% humidity, non-condensing. Indoor use only.
Color: Gray
Size and weight: 12"H × 4"D × 12"W, 8 pounds
