Product Description

Doug Fleenor Design 16 Port Ethernet to DMX Interface, DIN-Rail Mounted, Rackmount

Overview

The NODE16 is a portable or rack mounted Ethernet to DMX bridging device. It accepts Artistic License's Art-Net or Streaming ACN (ANSI E1.31) protocols. There are sixteen DMX512 outputs, and each of the outputs are isolated from the Ethernet input and all other outputs. The Ethernet input connection is made via an Ethercon RJ45 connector, and the DMX512 output connections are made via 5-pin female XLRs. The NODE16 is powered by 100-240 VAC. NODE configuration takes place with a backlit graphical LCD and an encoder wheel.

DFD NODE16-RACKMOUNT Specifications:

• DMX PORT:
  • Port circuit: Protected EIA-485 receiver (LT1785)
  • NOTE: This product uses slew-rate-limited output drivers. Slew-rate-limited drivers
  • minimize EMI and reduce reflections.
  • Output signal: 1.5 Volts (minimum) into 120 Ohm Termination
  • Connectors: 16 5-pin female XLRs on rear panel
  • Port protection: +60V continuous, +15KV transient
  • Isolation: Optically isolated to 1,500 Volts from the input. Fully isolated DMX outputs.
• ETHERNET:
  • Input circuit: 802.3 Ethernet compliant input (LAN8720)
  • Input signal: Art-Net or sACN (ANSI E1.31) Ethernet protocols
  • Input connector: Ethercon RJ-45 on front panel
  • MDIX: Auto-negotiated
• MAIN:
  • Power input: 100-240 VAC, 30W
  • Indicators: 1 Red POWER indicator
  • 1 Green Ethernet link indicator
  • 1 Yellow Ethernet activity indicator
  • 16 Green MIMIC 1 indicators mimic the level of the first channel on each output (useful
  • in troubleshooting)
  • 16 Green SIGNAL indicators illuminate when DMX output signal is present on each port
  • Configuration: Backlit graphical LCD and an encoder wheel.
  • Environmental: 0-40 °C (32-104 °F); 10-90% humidity, non-condensing
  • Cooling: Convection cooling, no fan required
  • Color: Top, bottom and sides: Silver hammer tone
  • Front and back: Black
  • Size and weight: 1.7”H × 6.5”D × 16.5”W, 6.5 pounds