Product Description
DBX DBX641MV 6x4 Digital Zone Processor
Overview
With 6 inputs and 4 outputs the dbx ZonePRO® 641m provides flexible signal routing, powerful DSP processing and multiple control interfaces for commercial audio applications.
Designed to offer superior sonic performance and flexibility, the 641m delivers the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer four Euroblock connectors for balanced microphone or line signals (switchable), plus two stereo RCA connectors for interfacing with consumer equipment; there is also a simple analog input bus that allows inputs to be sent from one ZonePRO unit to the next for unit and job scalability.
The 641m provides every necessary processing tool, from the input processing like gain control and EQ available on all inputs to dbx's trademark, sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression, and Feedback Suppression. The heart of the ZonePRO products is the Routing module that allow for not only Primary Source Selection but also Source Ducking for Paging and Priority Override.
The outputs also offer a breadth of processing options that are perfect for commercial applications. For example, dbx’s patent-pending AutoWarmth® function that was co-developed with JBL was included to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization.
The 641m can be controlled by ZonePRO Designer software via RS-232 and Ethernet, as well as wall panel control. With the ZonePRO® every tool is at your disposal to maximize the response of your system. Get yours today.
Features
- 6 inputs/4 outputs
- Mic gain on channels 1-4
- Two configurable input insert positions, one output
- AutoWarmth per output zone
- Ethernet control
Specifications
- Front Panel LED Indicators: Network Traffic, Power
- Analog Inputs: 6 total (4) Switchable mic or line, (2) unbalanced, mono-summed RCA input pairs
- Type: Euroblock (Mic/Line), RCA (Source)
- Impedance (Euroblock): >50 kΩ Balanced, >25 kΩ Unbalanced, RF filtered
- Impedance (RCA): >25 kΩ Unbalanced, RF filtered
- Max. Input Line Level: +20 dBu Mic/Line, +12 dBu RCA
- CMRR: >40 dB, typically >55 dB @ 1 kHz
- Mic Pre Gain: 30 to 60 dB
- Mic Input Noise (E.I.N.): < -118 dBu, 22 Hz to 22 kHz, 150 Ω Source Impedance
- Mic Phantom Power: +15V DC
- Analog Outputs: 4 total
- Type: Electronically balanced, RF filtered Euroblock
- Impedance: 120 Ω Balanced, 60 Ω Unbalanced
- Max. Output Level: +20 dBu
- A/D Performance
- Type: dbx Type IV Conversion System
- Dynamic Range Line: >113 dB, A-weighted, >110 dB unweighted
- Type IV Dynamic Range: >119 dB, A-weighted, 22 kHz; BW: >117 dB, unweighted, 22 kHz BW
- Sample Rate: 48 kHz
- D/A Performance
- Dynamic Range: 112 dB A-weighted, 109 dB unweighted, 22 kHz BW
- System Performance
- Dynamic Range: >109 dB A-weighted, >106 dB unweighted, 22 kHz BW
- THD+N: 0.003% typical at +4 dBu, 1 kHz, 0 dB gain
- Frequency Response: 20 Hz to 20 kHz, ±0.5 dB
- Interchannel Crosstalk: >80 dB typical
- Crosstalk input to output: >80 dB
- Propagation Delay: 0.6 ms
- Power Requirements
- Operating Voltage: 100 VAC 50/60 Hz, 120 VAC 60 Hz, 230VAC 50/60 Hz
- Power Consumption: 29 W
- BTU: < 92.13
- Weight: 6.8 lbs
- Dimensions: 1.75" (1U) x 19" x 7.75"