Product Description
DBX DBX640V ZonePro 640 6x4 Digital Zone Processor
Overview
With 6 inputs and 4 outputs the dbx ZonePRO® 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for commercial audio applications.
Designed to offer superior sonic performance and flexibility, the 640 delivers the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer two Euroblock connectors for balanced microphone or line signals (switchable), plus four stereo RCA connectors for interfacing with consumer equipment; there is also a simple analog input bus that allows inputs to be sent from one ZonePRO unit to the next for unit and job scalability.
The 640 provides every necessary processing tool, from the input processing like gain control and EQ available on all inputs to dbx's trademark, sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression, and Feedback Suppression. The heart of the ZonePRO products is the Routing module that allow for not only Primary Source Selection but also Source Ducking for Paging and Priority Override.
The outputs also offer a breadth of processing options that are perfect for commercial applications. For example, dbx’s patent-pending AutoWarmth® function that was co-developed with JBL was included to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization.
As an improvement from the dbs 641, the 640 can be controlled not only by ZonePRO Designer (software via RS-232, Ethernet) and wall panel control, but also by it's onboard LCD screen and menu buttons. With the ZonePRO® every tool is at your disposal to maximize the response of your system. Get yours today.
Features
- Advanced Feedback Suppression (AFS)
- Autowarmth
- Auto gain control
- Compressor, limiter, noise gate, notch filter, parametric EQ
- RS-232 Control
Specifications
- Input: (6 total) (2) Switchable line or mic inputs (4) RCA Source
- Input Connectors: Euroblock (Line and Mic) RCA (Source)
- Input Type: Electronically balanced/RF-filtered
- Input Impedance: 50 kΩ balanced, >75 kΩ unbalanced
- Max Input: +20 dBu Mic/Line, +12 dBu RCA
- CMRR: >40 dB, typically >55 dB @ 1 kHz
- Mic Preamp gain: 30 to 60 dB
- Mic Preamp Equivalent Input Noise (EIN): < -118 dB
- Mic Preamp Phantom Power: +15V
- Output: 4 total
- Output Connectors: Euroblock
- Output Type: Electronically Balanced, RF Filtered
- Output Impedance: 120 Ω balanced, 60 Ω unbalanced
- Max Output: +20 dBu
- A/D Converter: dbx Type IV™ conversion system
- A/D Dynamic Range: (line) >113 dB, A-weighted, >110 dB unweighted
- Type IV Dynamic Range: >119 dB, A-weighted, 22 kHz; BW: >117 dB, unweighted, 22 kHz BW
- Digital Output: RCA 24-Bit oversampling
- Digital Output Dynamic Range: >114 dB A-weighted, 110 dB unweighted
- Sample Rate: 48 kHz
- D/A Dynamic Range: 112 dB A-weighted, 109 dB unweighted
- Dynamic Range: >109 dB A-weighted, >106 dB unweighted
- THD+Noise: 0.003% typical at +4 dBu, 1kHz, 0 dB gain
- Frequency Response: 20 Hz - 20 kHz, ±0.5 dB
- Interchannel Crosstalk: >80 dB typical
- Propagation Delay: 0.6 ms
- Operating Voltage: 100VAC 50/60 Hz, 120VAC 60 Hz, and 230VAC 50/60 Hz
- Power Consumption: 29 W
- Weight: 6.8 lbs. (3.1 kg)
- Dimensions (H x W x D): 1.75" x 19" x 5.75"
- Safety Agency Certifications: UL 600065, IEC 60065, EN 55013, E60065