Product Description
Community R1-94Z 12-inch 2-Way Horn-Loaded Speaker with 80x35 Dispersion - Grey
The R1-94Z two-way full-range loudspeaker system is engineered to provide quality full-range sound projection in a variety of outdoor and indoor applications. Its wide range, smooth frequency response and high efficiency ensures both high fidelity music reproduction and superb projection of clear intelligible speech with very low distortion. The R1 loudspeakers are available in two versions. The standard version is weather-ready, with a WeatherStop grille and light grey finish. The BNG version, with black exterior and no grille, is more suitable for indoor applications.
Features
- Weather-resistant, all-fiberglass enclosure
- Weather-treated drivers and crossovers
- Corrosion-resistant zinc-rich epoxy dual-layer powder coated steel grille and yoke
- Pattern control to below 500 Hz
- High efficiency
- Integral mounting points
- High power passive crossover
- High-fidelity, full-range reproduction of music and speech
- Application-specific coverage pattern
- Optional “indoor” version available with a black enclosure and no grille (model R1-64BNG)
Specs
- Loudspeaker Type: 2-way horn loaded coaxial, weather-resistant
- Operating Range:
- 90 Hz to 16 kHz
- 110 Hz to 10 kHz (+/- 4 dB)
- Max Input Ratings: 200W continuous, 500W program, 40 volts RMS, 89 volts momentary peak
- Recommended Power Amplifier: 420W to 600W @ 8 Ohms
- Sensitivity (1W/1m):
- 104 dB SPL (100 Hz to 16 kHz 1/3 octave bands)
- 105 dB SPL (250 Hz to 4 kHz speech range)
- Maximum Output: 127 dB SPL / 134 dB SPL (peak)
- Nominal Impedance: 8 Ohms
- Minimum Impedance: 5.7 Ohms @ 230 Hz
- Nominal –6dB Beamwidth:
- 80° H (+0° / -49°, 1 kHz to 16 kHz)
- 35° V (+4° / -10°, 1 kHz to 16 kHz)
- 100° H x 100° V (400 Hz)
- Axial Q / DI: 29.7 / 14.7, 1 kHz to 16 kHz
- Crossover Frequency: 1.2 kHz
- Recommended Signal Processing: 90 Hz high pass filter
- Drivers:
- LF: 1x 12” weather-treated, Ferrofluid-cooled
- HF: 1x 1” exit, titanium diaphragm
- Driver Protection: PowerSense DDP
- Input Connection: 12 foot (4 m) SJOW #16 gauge
- Controls: None
- Enclosure: Hand-laminated fiberglass, light grey gel coat
- Mounting/Rigging Provisions: (5) 1/2-13 rigging points
- Grille: 3-layer WeatherStop, light grey (Zinc-rich epoxy dual-layer powder coated perforated steel grille, foam, woven poly mesh)
- Environmental Performance: IEC529 IP55W rating with a minimum 5-degree downward aiming angle
- Required Accessories: 90 Hz high pass filter
- Supplied Accessories: SSYR1 yoke bracket, light grey
- Optional Accessories: TRC400 400-watt 70/100/140-volt transformer
- Dimensions:
- Height: 24.75 inches (629 mm)
- Width: 24.75 inches (629 mm)
- Depth: 29.75 inches (756 mm)
- Weight (without yoke): 47.5 lbs (21.5 kg)
- Weight (with yoke): 55.5 lbs (25.2 kg)
Other Details
1. This limited warranty is being offered by Biamp Systems, LLC. Biamp Systems warrants to the original end user customer of new Biamp Systems products from an authorized Biamp Systems dealer that the product will be free from defects in materials and workmanship for a specified period (the “Warranty Period”), subject to the terms and conditions set forth below. The Warranty Period shall be five (5) years, except for products listed in the Warranty Period Exception Table below, for which there is a different time period specified. The Warranty Period begins (a) the date of the original end user’s purchase from an authorized Biamp Systems dealer or (b) six months after the product is first shipped from Biamp Systems’ factory to an authorized Biamp Systems dealer or distributor, whichever occurs earlier. This warranty extends only to the original end user customer and is not assignable or transferable.
2. Within the Warranty Period, Biamp Systems will repair or replace, at Biamp Systems' option, nonconforming product, provided that Biamp Systems is notified within 30 days of the identification of such defect or failure. Replacement Products may be new or reconditioned. If the repair or replacement of your nonconforming product is not reasonably available, at Biamp Systems’ discretion, Biamp Systems will refund you the purchase price. As a condition to receiving the benefits of this warranty, you must provide Biamp Systems with documentation that establishes that you were the original end user purchaser of the product from an authorized Biamp Systems dealer. Such evidence may consist of your sales receipt.
3. Upon notice, Biamp Systems will provide instructions on the warranty claim procedures to be followed and issue a Return Authorization (RA) number if required. Any export/import authorizations or duties, transportation and insurance charges to the Biamp Systems factory, or other service facility designated by Biamp Systems, for warranty service shall be your responsibility. Transportation and insurance charges from the Biamp Systems factory or service facility after a warranty repair or for a warranty replacement will be paid by Biamp Systems. Biamp Systems is not responsible for any damage to the product during transit to the Biamp Systems factory or service facility. Biamp Systems, at its sole discretion, will determine warrantable failures upon receipt of your product or upon inspection of your product by an authorized Biamp Systems dealer. All products that are returned by you and replaced by Biamp Systems will become the property of Biamp Systems.
4. This warranty will be VOID if the serial number has been removed or defaced; or if the product has been altered, subjected to damage, abuse or rental usage, repaired by any person not authorized by Biamp Systems to make repairs; damaged due to improper or inadequate maintenance; operated outside the normal environmental specifications for the product; or installed in any manner that does not comply with Biamp Systems' recommendations. This warranty does not apply to damage caused by an accident, power surge, flooding, fire, earthquake, or other external causes. This warranty does not apply to damage caused by abuse or misuse of the product.
5. Electro-mechanical fans, electrolytic capacitors, gooseneck microphones, cords connecting handheld microphones, hard-drives, displays, consumable parts (i.e. batteries), and normal wear and tear of items such as paint, knobs, handles, keypads and covers are not covered under this warranty. All software or firmware distributed by Biamp Systems is provided AS IS and without any warranty of any kind, except as expressly provided in any documentation or license agreement furnished with the software or firmware. This warranty does not apply to third party products resold by Biamp Systems.
6. This warranty is in lieu of all other warranties, expressed or implied. Biamp Systems disclaims all other warranties, expressed or implied, including, but not limited to, implied warranties of non-infringement, merchantability and fitness for a particular purpose.
7. The remedies set forth herein shall be the purchaser's sole and exclusive remedies with respect to any defective product. No repair or replacement of any product or part thereof will extend the applicable warranty period for the entire product. The specific warranty for any repair will extend for a period of 90 days following the repair or the remainder of the warranty period for the product, whichever is longer.
8. No agent, employee, distributor or dealer of Biamp Systems is authorized to modify this warranty or to make additional warranties on behalf of Biamp Systems. Statements, representations or warranties made by any dealer do not constitute warranties by Biamp Systems. Biamp Systems shall not be responsible or liable for any statement, representation or warranty made by any dealer or other person. Biamp Systems makes no other warranty beyond what is contained in this writing.
9. No action for breach of this warranty may be commenced more than one year after the expiration of this warranty.
10. Biamp Systems shall not be liable for special, indirect, incidental, or consequential damages, including lost profits or loss of use arising out of the purchase, sale, or use of the products, even if Biamp Systems was advised of the possibility of such damages.
Product Videos