Product Description
Community IS6-212 Dual 12-inch Passive Subwoofer 1400W
The Community IS6-212 is an I Series Subwoofer 600 dual 12" 1400W (4 Ohms) passive installation subwoofer. This subwoofer is well-suited for applications such as houses of worship, auditoriums, restaurants, meeting rooms, corporate A/V systems, arenas, stadiums, or any other application where extended low-frequency reinforcement is required.
I Series Subwoofer 600 loudspeakers provide exemplary acoustic performance, modular flexibility and elegant aesthetics for modern performance venues. Designed to support the goals of systems integrators and consultants both acoustically and mechanically, I Series Subwoofers provide a broad range of sizes and capabilities that can be specifically matched to the needs of any modern venue.
Each cabinet was carefully designed to provide matching heights, face widths and suspension point locations for seamless integration into flown arrays with I Series full-range models. The broad range of optional low profile fly rails, fly frames and modular array brackets reduces design and installation time while also providing improved aesthetics and nearly limitless integration possibilities.
The IS6-212 is a compact, direct radiating subwoofer with large, balanced ports that provide optimal enclosure tuning and even air pressure distribution to the driver cones, reducing distortion and extending system longevity. Drivers are loaded into individual air volumes within the enclosure, isolating their performance from one another. This arrangement not only provides additional protection to drivers in case of failures, but also allows the designer to implement directional subwoofer techniques, like steered end-fire arrays and cardioid patterns, within a single enclosure when using any I Series dual driver subwoofer model.
Features
- Long excursion ferrite LF drivers with FEA-optimized motors and symmetric movement suspension
- Matched-size enclosure and aligned suspension point for seamless flown array integration
- 1400W continuous power handling (5600W peak)
- High sensitivity design minimizes power compression losses and required amplifier size
- Isolated driver air volumes allow use of directional steering techniques within a single enclosure
Specs
- Operating Mode: Single or Dual Amp
- Operating Environment: Indoor
- Operating Range: 38 Hz - 150 Hz
- Transducers: 2x 12" (300 mm) double-treated cones with 4" (102 mm) inner/outer wound voice coil, ferrite construction
- Continuous Power Handling @ Nominal Impedance:
- Single Amp, 75V: 1400W @ 4 Ohms (5600W peak)
- Dual Amp, 75V: 700W @ 8 Ohms (2800W peak) each
- Nominal Sensitivity:
- Half Space: 103dB @ 1W; 106dB @ 2.83V
- Whole Space: 97dB @ 1W; 100dB @ 2.83V
- Nominal Maximum SPL:
- Half Space: 134dB continuous; 140dB peak
- Whole Space: 128dB continuous; 134dB peak
- Equalized Sensitivity:
- Half Space: 99dB @ 1W; 102dB @ 2.83V
- Whole Space: 93dB @ 1W; 96dB @ 2.83V
- Equalized Maximum SPL:
- Half Space: 130dB continuous; 136dB peak
- Whole Space: 124dB continuous; 130dB peak
- Recommended Amplifiers:
- Single Amp: 1400W - 2800W @ 4 Ohms (75V - 106V)
- Dual Amp: 700W - 1400W @ 8 Ohms (75V - 106V) each driver
- Physical:
- Input Connection: (2) 4-position screw terminal blocks
- Mounting Points: (24) M10 threaded rigging points
- Environmental: IPX4 per IEC 60529, designed in accordance wtih MIL-STD-810G
- Dimensions (H x W x D): 28.00" x 14.50" x 21.00 " (711 x 368 x 533 mm)
Other Details
1. This limited warranty is being offered by Biamp Systems, LLC. Biamp Systems warrants to the original end user customer of new Biamp Systems products from an authorized Biamp Systems dealer that the product will be free from defects in materials and workmanship for a specified period (the “Warranty Period”), subject to the terms and conditions set forth below. The Warranty Period shall be five (5) years, except for products listed in the Warranty Period Exception Table below, for which there is a different time period specified. The Warranty Period begins (a) the date of the original end user’s purchase from an authorized Biamp Systems dealer or (b) six months after the product is first shipped from Biamp Systems’ factory to an authorized Biamp Systems dealer or distributor, whichever occurs earlier. This warranty extends only to the original end user customer and is not assignable or transferable.
2. Within the Warranty Period, Biamp Systems will repair or replace, at Biamp Systems' option, nonconforming product, provided that Biamp Systems is notified within 30 days of the identification of such defect or failure. Replacement Products may be new or reconditioned. If the repair or replacement of your nonconforming product is not reasonably available, at Biamp Systems’ discretion, Biamp Systems will refund you the purchase price. As a condition to receiving the benefits of this warranty, you must provide Biamp Systems with documentation that establishes that you were the original end user purchaser of the product from an authorized Biamp Systems dealer. Such evidence may consist of your sales receipt.
3. Upon notice, Biamp Systems will provide instructions on the warranty claim procedures to be followed and issue a Return Authorization (RA) number if required. Any export/import authorizations or duties, transportation and insurance charges to the Biamp Systems factory, or other service facility designated by Biamp Systems, for warranty service shall be your responsibility. Transportation and insurance charges from the Biamp Systems factory or service facility after a warranty repair or for a warranty replacement will be paid by Biamp Systems. Biamp Systems is not responsible for any damage to the product during transit to the Biamp Systems factory or service facility. Biamp Systems, at its sole discretion, will determine warrantable failures upon receipt of your product or upon inspection of your product by an authorized Biamp Systems dealer. All products that are returned by you and replaced by Biamp Systems will become the property of Biamp Systems.
4. This warranty will be VOID if the serial number has been removed or defaced; or if the product has been altered, subjected to damage, abuse or rental usage, repaired by any person not authorized by Biamp Systems to make repairs; damaged due to improper or inadequate maintenance; operated outside the normal environmental specifications for the product; or installed in any manner that does not comply with Biamp Systems' recommendations. This warranty does not apply to damage caused by an accident, power surge, flooding, fire, earthquake, or other external causes. This warranty does not apply to damage caused by abuse or misuse of the product.
5. Electro-mechanical fans, electrolytic capacitors, gooseneck microphones, cords connecting handheld microphones, hard-drives, displays, consumable parts (i.e. batteries), and normal wear and tear of items such as paint, knobs, handles, keypads and covers are not covered under this warranty. All software or firmware distributed by Biamp Systems is provided AS IS and without any warranty of any kind, except as expressly provided in any documentation or license agreement furnished with the software or firmware. This warranty does not apply to third party products resold by Biamp Systems.
6. This warranty is in lieu of all other warranties, expressed or implied. Biamp Systems disclaims all other warranties, expressed or implied, including, but not limited to, implied warranties of non-infringement, merchantability and fitness for a particular purpose.
7. The remedies set forth herein shall be the purchaser's sole and exclusive remedies with respect to any defective product. No repair or replacement of any product or part thereof will extend the applicable warranty period for the entire product. The specific warranty for any repair will extend for a period of 90 days following the repair or the remainder of the warranty period for the product, whichever is longer.
8. No agent, employee, distributor or dealer of Biamp Systems is authorized to modify this warranty or to make additional warranties on behalf of Biamp Systems. Statements, representations or warranties made by any dealer do not constitute warranties by Biamp Systems. Biamp Systems shall not be responsible or liable for any statement, representation or warranty made by any dealer or other person. Biamp Systems makes no other warranty beyond what is contained in this writing.
9. No action for breach of this warranty may be commenced more than one year after the expiration of this warranty.
10. Biamp Systems shall not be liable for special, indirect, incidental, or consequential damages, including lost profits or loss of use arising out of the purchase, sale, or use of the products, even if Biamp Systems was advised of the possibility of such damages.
Product Videos