Product Description
Community IC6-1082WT96 8-inch 2-Way Installation Speaker - Weather Resistant - Grey
The Community I SERIES Compact 600 loudspeakers provide excellent acoustic performance, flexibility and elegant aesthetics for a diverse range of applications in today's performance venues. Designed to support the goals of systems integrators and consultants in need of very compact loudspeakers with exceptional near field fidelity for foreground or background music applications and articulate voice projection with very high output capabilities for fill and distributed applications. I SERIES Compact loudspeakers are engineered to be used alone or integrated into arrays along with I SERIES Point Source (IP) or Subwoofer (IS) models using the comprehensive selection of available BalancePoint Flyware modular array brackets.
The IC6-1082/96 is designed for maximum performance in a minimal size enclosure. The large, rotatable horn coupled to a 1.75" (44mm) diaphragm HF driver provides consistent directivity and smooth response through the critical voice band, then seamlessly integrates with the high output 8" LF through the crossover region. The precisely engineered low velocity, flared port ensures low distortion, extended LF performance at any output level. Additionally, 8 ohm or 70V/100V models expand application flexibility both indoors and out. Multiple attachment points provide compatibility with a variety of Community and third party mounting brackets.
The Community IC6-1082WT96 loudspeaker system is a two-way, full-range design incorporating one 8 in. (203mm) ferrite LF driver with an inherently weather resistant cone and one 1 in. (25mm) exit advanced polymer diaphragm, ferrite compression driver. The drivers are connected to an internal frequency dividing network with an acoustical crossover frequency of 1800 Hz. The system is equipped with a high performance 200W autoformer for use in 70V/100V audio systems, with taps of 25W, 50W, 100W, and 200W for 70V operation (50W, 100W, and 200W for 100V systems). The modified trapezoidal loudspeaker enclosure is constructed of a thermally stabile, dense structural-grade composite embedded with dual layers of fiberglass cloth and is fitted with (7) M10 and (4) M8 rigging inserts. The enclosure has a dual-layer finish of heavy exterior-grade paint and a UV-resistant top coat. The front of the enclosure is fitted with a wraparound powder-coated 1.5mm perforated marinegrade aluminum grille backed with acoustically transparent woven fabric that has been treated with a hydrophobic compound. The secured input panel cover and gland nut provides a sealed connection for the internally connected 12 ft (3.6m) 14 gauge SJOW cable. The system has an operating range of 53 Hz to 20 kHz (-10dB SPL). The system produces a sound pressure level of 95 dB (averaged SPL between -10 dB points) on axis at one meter with a power input of 1 Watt, and is capable of producing a continuous output of 119 dB SPL (with peak output of 125 dB SPL) on axis at one meter. The nominal dispersion is 90° H x 60° V. The loudspeaker is 18.75 in. (476 mm) H x 10.40 in. (264 mm) W (front) x 7.69 in. (195 mm) W (rear) x 10.63 in. (270 mm) D, and weighs 23.2 lbs. (10.5 kg).
Please note: Image shown is for display purposes only. Product may differ in appearance.
Features
- Excellent LF extension and output in a very small enclosure
- Exceptional fidelity with elegant I SERIES aesthetics
- Large, field-rotatable HF horn for smooth, consistent coverage
Specs
- Technical Specifications
- Operating Environment: Weather-Resistant Outdoor
- Operating Range: 53 Hz to 20 kHz
- Nominal Beamwidth (H x V): 90° x 60°, rotatable waveguide
- Transducers:
- LF 1 x 8" (203mm) ferrite driver, 1.8" (45mm) voice coil
- HF 1 x 1" (25mm) exit, 1.75" (44mm) voice coil, advanced polymer diaphragm, ferrite compression driver
- Recommended Amplifiers: 250W - 500W @ 8 ohms, (45V - 63V)
- Physical
- Input Connection: (1) Screw terminal block (5-position)
- Mounting Points: (7) M10 threaded inserts; (4) M8 threaded inserts (rear)
- Environmental Outdoor: IP55W per IEC 60529, MIL-STD-810G
- Weight: 23.2 lbs (10.5 kg) loudspeaker
- Dimensions (H x W x D): 18.75" x 10.40" x 10.63" (476 x 264 x 270 mm)
Other Details
1. This limited warranty is being offered by Biamp Systems, LLC. Biamp Systems warrants to the original end user customer of new Biamp Systems products from an authorized Biamp Systems dealer that the product will be free from defects in materials and workmanship for a specified period (the “Warranty Period”), subject to the terms and conditions set forth below. The Warranty Period shall be five (5) years, except for products listed in the Warranty Period Exception Table below, for which there is a different time period specified. The Warranty Period begins (a) the date of the original end user’s purchase from an authorized Biamp Systems dealer or (b) six months after the product is first shipped from Biamp Systems’ factory to an authorized Biamp Systems dealer or distributor, whichever occurs earlier. This warranty extends only to the original end user customer and is not assignable or transferable.
2. Within the Warranty Period, Biamp Systems will repair or replace, at Biamp Systems' option, nonconforming product, provided that Biamp Systems is notified within 30 days of the identification of such defect or failure. Replacement Products may be new or reconditioned. If the repair or replacement of your nonconforming product is not reasonably available, at Biamp Systems’ discretion, Biamp Systems will refund you the purchase price. As a condition to receiving the benefits of this warranty, you must provide Biamp Systems with documentation that establishes that you were the original end user purchaser of the product from an authorized Biamp Systems dealer. Such evidence may consist of your sales receipt.
3. Upon notice, Biamp Systems will provide instructions on the warranty claim procedures to be followed and issue a Return Authorization (RA) number if required. Any export/import authorizations or duties, transportation and insurance charges to the Biamp Systems factory, or other service facility designated by Biamp Systems, for warranty service shall be your responsibility. Transportation and insurance charges from the Biamp Systems factory or service facility after a warranty repair or for a warranty replacement will be paid by Biamp Systems. Biamp Systems is not responsible for any damage to the product during transit to the Biamp Systems factory or service facility. Biamp Systems, at its sole discretion, will determine warrantable failures upon receipt of your product or upon inspection of your product by an authorized Biamp Systems dealer. All products that are returned by you and replaced by Biamp Systems will become the property of Biamp Systems.
4. This warranty will be VOID if the serial number has been removed or defaced; or if the product has been altered, subjected to damage, abuse or rental usage, repaired by any person not authorized by Biamp Systems to make repairs; damaged due to improper or inadequate maintenance; operated outside the normal environmental specifications for the product; or installed in any manner that does not comply with Biamp Systems' recommendations. This warranty does not apply to damage caused by an accident, power surge, flooding, fire, earthquake, or other external causes. This warranty does not apply to damage caused by abuse or misuse of the product.
5. Electro-mechanical fans, electrolytic capacitors, gooseneck microphones, cords connecting handheld microphones, hard-drives, displays, consumable parts (i.e. batteries), and normal wear and tear of items such as paint, knobs, handles, keypads and covers are not covered under this warranty. All software or firmware distributed by Biamp Systems is provided AS IS and without any warranty of any kind, except as expressly provided in any documentation or license agreement furnished with the software or firmware. This warranty does not apply to third party products resold by Biamp Systems.
6. This warranty is in lieu of all other warranties, expressed or implied. Biamp Systems disclaims all other warranties, expressed or implied, including, but not limited to, implied warranties of non-infringement, merchantability and fitness for a particular purpose.
7. The remedies set forth herein shall be the purchaser's sole and exclusive remedies with respect to any defective product. No repair or replacement of any product or part thereof will extend the applicable warranty period for the entire product. The specific warranty for any repair will extend for a period of 90 days following the repair or the remainder of the warranty period for the product, whichever is longer.
8. No agent, employee, distributor or dealer of Biamp Systems is authorized to modify this warranty or to make additional warranties on behalf of Biamp Systems. Statements, representations or warranties made by any dealer do not constitute warranties by Biamp Systems. Biamp Systems shall not be responsible or liable for any statement, representation or warranty made by any dealer or other person. Biamp Systems makes no other warranty beyond what is contained in this writing.
9. No action for breach of this warranty may be commenced more than one year after the expiration of this warranty.
10. Biamp Systems shall not be liable for special, indirect, incidental, or consequential damages, including lost profits or loss of use arising out of the purchase, sale, or use of the products, even if Biamp Systems was advised of the possibility of such damages.
Product Videos