Product Description
Colortran Viewpoint LED control station, refurbished
Please note that these stations are no longer manufactured so refurbishment or repair is the best option for keeping your dimming system up and going. If you have an existing station, then you can get it repaired. If you do not have an existing station, then you can purchase a refurbished station.
The Colortran Viewpoint LED control station has 8-buttons.
These stations commonly work with Colortran Viewpoint ENR and Colortran I series e Leviton dimming systems. Please note that we only have these control stations availabe in the COLOR OF GRAY.
Here is the process for installing your refurbished Colortran Viewpoint LED control station. You can always call us at 1-866-457-5937 and we will walk you through this process over the phone:
TO REMOVE YOUR EXISTING VIEWPOINT LED STATION:
1. Please disconnect the station by peeling the front grey cover and then loosening the four screws from the wall box. The back of the station will have two connectors that will need to be unplugged. Please note this will not harm the systems operation while having the station disconnected for a period of time. **Please MAKE NOTE OF YOUR DIP-SWITCH POSITIONS! Taking a photo is recommended!**
TO INSTALL THE REFURBISHED VIEWPOINT LED STATION:
1. Set the dip-switch to exactly the same dip-switch position as your existing Viewpoint LED station.
2. Please plug the two connectors back into the station (please note they only fit in one way). Then, you should tighten the four screws that secure the station back into the wall box.
3. Please peel the new sticker cover and place it on the front of the station. Firmly press until it is secured. Please note that the top and bottom of the sticker overlay has three grooves that fit into the station. This makes for an even look.
4. Once that is all done press any of the preset buttons and station should be working just like new!
Please note: We do have programs available for purchasing in your bad Viewpoint LED station. Please email us at info@goknight.com if you would like to sell us your bad Viewpoint LED station.
