Unpack pack(s)............................................................... 1

Mount pack(s)................................................................ 1

Terminate conduits.......................................................... 3

Convert bussing to single-phase....................................... 3

Pull power, load and control conductors to the pack(s)........... 4

Connect power feeders.................................................... 4

Connect load conductors.................................................. 5

Low-voltage application notes............................................ 5

Connect control conductors............................................... 6

Seal unused openings...................................................... 6

Install control module(s)................................................... 7

Set thumbwheel switch(es)................................................ 7

Set Non-dim switches...................................................... 8

Apply power and check.................................................... 8

Install dimmers............................................................... 8

Install filler modules......................................................... 9

Test loads..................................................................... 9

Close door..................................................................... 9

Maintenance and Specifications......................................... 10

Warranty ...................................................................... 11