Product Description
CHAUVET PROFESSIONAL On Air Flex Drive 2 LED Driver
Overview
Add a powerful LED driver to your broadcast studio with this onAir Flex Drive 2 from Chauvet Professional. The driver provides 24V output, allowing long cable runs and featuring eight DMX output channels.
It supports adjustable PWM, and it has two outputs with up to 350W total that support RGBW tape and 4-channel control, and it features dynamic color mixing and automated programs. Its 1 RU half-rack chassis provides convection cooling, power linking, and built-in overcurrent and short-circuit protection. There are 5-pin DMX and 3-pin Phoenix connectors to assist with installation. A Neutrik powerCON TRUE1 power cable is included to power the unit.
Features
- TV focused 24 VDC constant voltage LED Driver with integrated power supply
- Adjustable PWM makes this product ideal for broadcast compatibility
- Two outputs support RGBW or generic 4-channel control for up to 350W of total power
- Assisted convection cooling utilizes a quiet fan for studio environments
- Built-in overcurrent and short circuit protection with indicator LEDs
- RDM supported for remote device management
- Scalable rack mount system, two per 1 RU space
- DMX 5-pin and 3-pin Phoenix connectors for installation support
Specifications
General
Power Input | Edison Plug to Neutrik powerCON TRUE1 Seetronic Powerkon (powerCON Compatible) |
Power Output | Seetronic Powerkon (powerCON Compatible) |
Data Connectors | Data Connectors: 5-pin XLR, 3 Pin Phoenix Connector |
Device Connectivity | 2 x 5-Pin Phoenix Connectors |
Maximum Cable Length | 100' / 30.48 m |
Power
Power Source | AC Input |
AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
Power Consumption | 400 W |
Operating Current | 3.34 A 1.93 A 1.74 A |
Environmental
IP Rating | IP20 |
Operating Temperature | -4 to 113°F / -20 to 45°C |
Physical
Color | Black |
Material of Construction | Steel |
Cable Length | 5' / 152.4 cm (Power) |
Dimensions | 5.4 x 4.3 x 0.8" / 137 x 109 x 20 mm |
Weight | 5.38 lb / 2.44 kg |