Product Description
Blizzard Lighting LightCaster W-DMX Receiver 2.4 GHz Wireless DMX Receiver ONLY
We are proud to announce the immediate availability of yet another exciting new wireless DMX option with the LightCaster™ W-DMX® 2.4 GHz wireless DMX system.
There are two types of LightCaster™ W-DMX® units, and while on the outside they look virtually identical, each unit is equipped to perform different tasks:
- "LightCaster™ WDMX™ Receiver" - (receiver only)
- "LightCaster™ WDMX™" - (transceiver, it can transmit or receive)
*These units are currently only sold individually, and not as a package.
A basic a LightCaster™ W-DMX® setup would consist of a Lightcaster™ WDMX™ transceiver (to transmit signal), and at least one LightCaster™ W-DMX® receiver (or possibly another transceiver unit) to receive the signal. For those not already familiar with W-DMX®, it is a two-time award winning wireless DMX technology, created and owned by Wireless Solution Sweden AB... and is today the un-official standard for those that require the most dependable product available for transmitting lighting control data wirelessly.
Users of the LightCaster™ W-DMX® system can expect an outstanding wireless range of up to 500 meters (line-of-sight) for any of their DMX512 compliant equipment, and leave any worries behind concerning loss of signal due to its built-in FHSS technology (Frequency Hopping Spread Spectrum). FHSS are frequency hopping techniques, in which the transmitter jumps from sub-channel to another at a very rapid pace. This technique was first used by the U.S. military precisely because they are difficult to disrupt, and unless you knew the frequency hopping sequence, practically impossible to intercept.
Setting up a wireless DMX system with LightCaster™ W-DMX® is a very simple procedure, with each of the two units having only a single function control button and a power, DMX, and mode status LED indicator. Users simply power on a transceiver to act as the transmitter, choose one of three modes (frequencies), then power on any number of receivers and the system will automatically sync together. For multiple transmitter setups, it's as simple as choosing a different frequency group for the next transceiver, then powering up the next receiver or a group of receivers. An unlimited number of receivers can be controlled by each transceiver, each one able to control 512 channels of DMX (1 universe).
Endless setup possibilities can be achieved by using either point-2-point, or multipoint-2-multipoint operation:
- Basic point-2-point systems are used when you want to send wireless DMX data from a console to a single receiver. As the receiver accepts all 512 DMX channels from the transceiver, you can easily daisy chain more fixtures by cable from the fixture with the wireless connection.
- Up to 16 universes of DMX can be transmitted simultaneously using a multipoint to multipoint approach. All receivers in a multipoint system will listen only to the designated transmitter without any delays or interference from the systems working alongside.
Each LightCaster™ W-DMX® unit also features an integrated clamp for mounting to 2" truss, is housed in a durable anodized aluminum casing, and equipped with a POWERCON™ compatible power connection, so no wall wart is necessary.
LightCaster™ W-DMX® units are now available for immediate shipping!
Product Specifications
Features
One button operation 2.4Ghz W-DMX® wireless system
W-DMX G5 Protocol – backward compatible with G4S/G3
Compatible with all DMX512 compliant equipment
FHSS (Frequency-Hopping Spread Spectrum) technology
POWERCON-compatible power input
Integrated clamp for mounting to 2" truss
Control
Transmit power (transceiver unit): 100mW
Receiver sensitivity: 98dBm
Max Operating Range: 500 meters (line-of-sight)
Latency: < 5mS
Antenna type: 2dBi
Universes: 1 per transmitter, max. 16
Warranty
Other Details
Blizzard Lighting, LLC hereby warrants that its products shall be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase or manufacture. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. This warranty shall be valid only if the product is purchased from an authorized dealer appointed by Blizzard Lighting, LLC. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence.
For warranty service you must obtain a Return Merchandise Authorization number (RMA#) before sending back the product. Contact Blizzard Lighting, LLC’s Service Department at www.blizzardlighting.com/support to open a support ticket. Send the product only to the Blizzard Lighting, LLC factory. All shipping charges must be prepaid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, Blizzard Lighting, LLC will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, Blizzard Lighting, LLC shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.
This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which Blizzard Lighting, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the Blizzard Lighting, LLC factory unless prior written authorization was issued to purchaser by Blizzard Lighting, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specified above, Blizzard Lighting, LLC will replace defective parts at its expense with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of Blizzard Lighting, LLC under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of Blizzard Lighting. Blizzard Lighting, LLC reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured.
No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by Blizzard Lighting, LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall Blizzard Lighting, LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product. This warranty is the only written warranty applicable to Blizzard Lighting Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.
LIMITED WARRANTY PERIODS:
• LED Products: 2 years (Including motors, PCB boards, power supplies, driver boards and wiring, does not include damage to LEDs or any of the previously listed parts caused by mishandling)
• Lamp Fixtures: 2 years
• All Lamps: as-is
• All Batteries: 1 year
• Fog/Atmospheric Products: 1 year
• Controller Products: 2 years
• Laser Products: 2 years
• Laser Diodes: 6 months
• B-Stock Products: 90 days
• Other products not listed here: 90 days
Product Videos