Product Description
Audix SCX1O Professional Studio Cardioid Condenser Microphone With Omnidirectional Capsule
High-quality cardioid condenser studio condenser microphone with with omnidirectional capsule for acoustic instruments and room miking.
The SCX1O is a professional studio cardioid condenser microphone with omnidirectional capsule for acoustic instruments and room miking. Known for its high sensitivity, pin-point accuracy, low profile, and consistency, the SCX1O is also available with hypercardioid (model SCX1HC) capsules.
With a smooth uniform frequency response from 40 Hz – 20 kHz, the SCX1 is very consistent when responding to on and off-axis signals, and exhibits excellent phase coherence and minimal proximity effect. The SCX1 is characterized by a wide cardioid polar pattern; this, coupled with the high output and sensitivity of the microphone, makes the SCX1 an ideal choice for miking overhead, drums, instruments, room ambiance, orchestral sections, stringed instruments, piano, vibes, and sound effects. The SCX1HC condenser microphone is a number one choice for miking hi-hat both live and in the studio.
Other features include a 21 mm gold vapor capsule, miniaturized electronics, and an extremely small footprint.
Designed, machined, assembled, and tested by Audix in the USA.
1x SCX1O Studio Condenser Microphone
1x Protective zippered carrying case
1x DCLIP Microphone Clip
1x WSF9 External Windscreen
Interchangeable capsules available for the SCX1:
- CPSSCXC – Cardioid capsule
- CPSSCXHC – Hypercardioid capsule
- CPSSCXO – Omnidirectional capsule
Transducer Type | Condenser |
---|---|
Frequency Response | 40 Hz – 20 kHz |
Polar Pattern | Cardioid / Hypercardioid / Omni |
Output Impedance | 200 ohms |
Sensitivity | 26 (C) | 17 (HC) | 15 (O) mV / Pa @ 1k |
Equivalent Noise Level | 14 dB (A-weighted) |
Signal to Noise Ratio | 80 dB |
Maximum SPL | ≥130 dB |
Dynamic Range | 116 dB |
Power Requirements | 48-52 V phantom |
Connector | 3-pin XLRm |
Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
Materials / Finish | Machined Brass / Black Finish |
Weight | 114 g / 4 oz |
Length | 104 mm / 4.1 in |