Product Description
Audix SCX1HC Professional Studio Cardioid Condenser Microphone With Hypercardioid Capsule
High-quality cardioid condenser studio condenser microphone with hypercardioid capsule for hi-hats, acoustic instruments, and overheads.
The SCX1HC is a professional studio cardioid condenser microphone with hypercardioid capsules designed for a wide variety of recording, broadcast, and live sound applications. Known for its high sensitivity, pin-point accuracy, low profile, and consistency, the SCX1HC is also available with omnidirectional (model SCX1O) capsules.
With a smooth uniform frequency response from 40 Hz – 20 kHz, the SCX1 is very consistent when responding to on and off-axis signals, and exhibits excellent phase coherence and minimal proximity effect. The SCX1HC condenser microphone is a number one choice for miking hi-hat both live and in the studio.
Other features include a 21 mm gold vapor capsule, miniaturized electronics, and an extremely small footprint. The SCX1HC has become a popular choice for interior dialogue boom pole miking. It has a precision machined brass body, interchangeable capsules, black multi-layer class ‘A’ liquid finish, and a gold-plated XLR connector.
Designed, machined, assembled, and tested by Audix in the USA.
1x SCX1HC Studio Condenser Microphone
1x Protective zippered carrying case
1x DCLIP Microphone Clip
1x WSF9 External Windscreen
Interchangeable capsules available for the SCX1:
- CPSSCXC – Cardioid capsule
- CPSSCXHC – Hypercardioid capsule
- CPSSCXO – Omnidirectional capsule
Transducer Type | Condenser |
---|---|
Frequency Response | 40 Hz – 20 kHz |
Polar Pattern | Cardioid / Hypercardioid / Omni |
Output Impedance | 200 ohms |
Sensitivity | 26 (C) | 17 (HC) | 15 (O) mV / Pa @ 1k |
Equivalent Noise Level | 14 dB (A-weighted) |
Signal to Noise Ratio | 80 dB |
Maximum SPL | ≥130 dB |
Dynamic Range | 116 dB |
Power Requirements | 48-52 V phantom |
Connector | 3-pin XLRm |
Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
Materials / Finish | Machined Brass / Black Finish |
Weight | 114 g / 4 oz |
Length | 104 mm / 4.1 in |