Product Description
Audix M1280BHC Miniaturized Condenser Microphone With Hypercardioid Capsule
The M1280BHC, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1280BHC condenser microphone is equipped with a hypercardioid capsule and is also available with cardioid, omnidirectional, or shotgun capsules. The M1280BHC has a very wide frequency response and may be used in a wide variety of stage, studio, and broadcast applications.
The M1280BHC miniaturized condenser microphone is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.
Designed, machined, assembled, and tested by Audix in the USA.
Wide frequency response micro condenser microphone with integrated preamp and RFI immunity and hypercardioid capsule for tighter pickup and greater isolation. Includes 25′ cable, clip, and windscreen. Requires 18 – 48 V phantom power. Black.
WHAT'S IN THE BOX?
- 1x M1280BHC Miniaturized Condenser Microphone
- 1x CBLM25 25′ Cable With Mini-XLRf – XLRm Connectors
- 1x MCMICRO Microphone Stand Adapter
- 1x MCHANGER Hanging Clip
- 1x External Windscreen
FEATURES
- Lightweight, small profile
- Miniaturized preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high SPL handling
- Designed, assembled, manufactured & tested in the USA
- 3 year warranty
APPLICATIONS
- Overhead mic for choir, group vocal
- Acoustic instruments
- Ambient room miking
- Symphonic area miking
- Speech, Presentation, Podium
- Cymbals, Percussion
- Acoustic guitar
SPECIFICATIONS
| Transducer Type | Condenser |
|---|---|
| Frequency Response | 40 Hz – 20 kHz |
| Polar Pattern | Hypercardioid |
| Output Impedance | 150 ohms |
| Sensitivity | 10 mV (C/HC), 12 mV (O), 18 mV (S) / Pa @ 1k |
| Equivalent Noise Level | 21 dB (A-weighted) |
| Signal to Noise Ratio | 73 dB |
| Maximum SPL | ≥147 dB |
| Power Requirements | 18 – 52 V |
| Dynamic Range | 126 dB |
| Connector | 3-pin XLRm |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
| Materials / Finish | Machined Brass / Black Finish |
| Weight | 28 g / 1 oz |
| Length | 67 mm / 2.6 in |
