Product Description
Audix M1250BS Miniaturized Condenser Microphone With Shotgun Capsule
The M1250BS is a miniaturized shotgun condenser microphone with a fully integrated preamp, detachable cable, and has RF immunity to prevent interference from cell phone and GSM devices. The M1250BS is also available with cardioid, hypercardioid, or omni capsules, giving the microphone the unique ability to be used in a wide variety of stage, studio, and broadcast applications.
The M1250BS condenser microphone is available with a wide array of clips and accessories allowing the microphone to be used for acoustic instruments, choral miking, overhead stage miking, podiums, conferences, and presentations.
Designed, machined, assembled, and tested by Audix in the USA.
Also available in white.
WHAT'S IN THE BOX?
- 1x M1250BS Miniaturized Condenser Microphone
- 1x CBLM25 25′ Cable With Mini-XLRf to XLRm Connectors
- 1x MCMICRO Microphone Stand Adapter (not included with models in white)
- 1x MCHANGER Hanging Clip
- 1x External Windscreen
FEATURES
- Lightweight, small profile
- Miniaturized preamp circuitry
- No external power adapter needed
- 12 mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high SPL handling
- Designed, assembled, manufactured & tested in the USA
- 3 year warranty
APPLICATIONS
- Acoustic instruments
- Ambient room miking
- Symphonic area miking
- Speech, Presentation
- Cymbals, Percussion
- Acoustic miking
- Choral miking
OPTIONAL ACCESSORIES
- MICROBOOM - 24”, 50” or 84” carbon fiber boom arm with clutch assembly
- MCSWIVEL - Shock mount adapter with ball and socket pivot for complete control over mic positioning. For use with The Micros
- DCLAMPMICRO - Lug mount adapted for hand percussion instruments with shockmount ring
- DVICEMICRO - Drum rim mount attachment with shockmount ring
- DFLEXMICRO - Wide jaw butterfly clip with shockmount ring
- MC20i - Clamp on clip for Sax, Trumpet and other brass instruments
- MGN Series - 6”, 12” or 18” gooseneck with base terminating in standard XLRm
- ATS10 - Heavy duty shock absorbent table stand
SPECIFICATIONS
| Transducer Type | Condenser |
|---|---|
| Frequency Response | 50 Hz – 19 kHz |
| Polar Pattern | Shotgun |
| Output Impedance | 150 ohms |
| Sensitivity | 10 mV (C/HC), 11mV (O/S) / Pa @ 1k |
| Equivalent Noise Level | 21 dB (A-weighted) |
| Signal to Noise Ratio | 73 dB |
| Maximum SPL | ≥140 dB |
| Dynamic Range | 119 dB |
| Power Requirements | 18-52 V |
| Connector | 3 pin mini-XLRm |
| Materials / Finish | Machined Brass / Black or White Finish |
| Weight | 16 g / 0.56 oz |
| Length | 54 mm / 2.1 in |
