Product Description
Audix ADX20I Wireless Component Condenser Instrument Microphone
The ADX20i miniature condenser microphone is applicable for professional stage and studio applications. This microphone is primarily used for miking most reed and brass instruments.
The ADX20i has a uniformly controlled cardioid polar pattern, which provides excellent isolation and feedback control on stage with natural sound reproduction at very close distances.
The ADX20i condenser instrument microphone is lightweight, compact, and simple to use. Included with the ADX20i is a gooseneck clip with spring tension for easy mounting to the bell of an instrument.
FEATURES
- Miniature condenser clip-on microphone
- Can be used wired or wireless
- Natural, accurate sound reproduction
- Butterfly type clip ideal for brass instruments
- Rubber shock mount system reduces vibration
- Designed, assembled & tested in the USA
- 3 year warranty
APPLICATIONS
- Saxophone
- Trombone, trumpet
- Room ambience, recording
- Accordion
- Cello, upright bass
MODELS
- ADX20i - Includes mic with 6’ cable, gooseneck clip and windscreen
- ADX20iP - Same as above with phantom power adapter (APS910)
SUPPLIED ACCESSORIES
- APS910 - Phantom power adapter
- MC20i - Gooseneck clip with shock mount. Butterfly clamp attaches to bell of horn.
- P1 - Carrying pouch.
- WS10 - External foam windscreen for reducing wind, sibilance, and pop noise.
OPTIONAL ACCESSORIES
- MCMICRO - Microphone stand adapter for The Micros™ series. Fits any 12 mm diameter microphone.
- SMTMICRO - Optional mic stand adapter with rubber shock mount housed within an aluminum ring. Attaches to any standard 5/8” threaded microphone stand.
SPECIFICATIONS
Transducer Type | Pre-Polarized Condenser |
Frequency Response | 40 Hz – 20 kHz |
Polar Pattern | Cardioid |
Output Impedance | 250 ohms |
Sensitivity | Cardioid – 6 mV / Pa @ 1k Hypercardioid – 5.6 mV / Pa @1k |
Equivalent Noise Level | <29 dB (A-weighted) |
Signal to Noise Ratio | >65 dB |
Maximum SPL | ≥135 dB |
Power Requirements | 9-52 V phantom |
Connector | Shielded 6’ terminating to a miniature 3 pin XLRf |
Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 |
Materials / Finish | Machined Brass Capsule / Black Finish |
Weight | 48 g / 1.7 oz |
Length | 29 mm / 1.14 in |