Product Description
Audio-Technica OPTIX2-S3-US RF-Over-Fiber Remote Antenna Distribution System
OPTIX Series 3 is a high-performance, RF to fiber optic (RFoF) conversion system designed to facilitate the remote placement of wireless audio antennas. The OPTIX Transmitter module converts RF signals arriving from an antenna source into a single-mode optical signal, sending that signal down a length of fiber-optic cable to the OPTIX Receiver module which converts the source signal back into RF. Without any signal loss over the optical cable, the OPTIX system can extend the range of antenna placement up to several kilometers, eliminating the need for bulky and lossy coaxial cable runs. Well-suited for live production as well as installed sound, OPTIX Series 3 features extensive user configurable controls to manage signal level, apply DC power for active antennas or amplifiers, and even directly monitor outputs to dial in performance. OPTIX Series 3 is compatible across VHF, UHF, and the 900 MHz band, and across any brand wireless audio system.
Available in single-channel (OPTIX1-S3-US) and dual-channel (OPTIX2-S3-US) systems.
Features
- RF to fiber optic conversion system designed to facilitate the remote placement of wireless audio antennas
- Extends the range of antenna placement up to several kilometers, eliminating the need for bulky and lossy coaxial cable runs
- Well-suited for live production and installed sound
- Features user configurable controls to manage signal level, apply DC power for active antennas or amplifiers, and directly monitor outputs
- Compatible across VHF, UHF, and the 900 MHz band, and across any brand wireless audio system
- Available in single-channel (OPTIX1-S3-US) and dual-channel (OPTIX2-S3-US) systems
Specs
- Usable dynamic range: 60 dB
- Input noise floor: -100 dBm
- Max usable signal: -25 dBm (do not exceed or clipping will occur)
- Typical operating frequency: 175-213, 470–698, 900-960 MHz
- VSWR avg.: < 2.5:1
- Impedance (nom): 50Ω
- Max RF input power: < 0 dBm / 1 mW
- DC operating voltage: 5–22 V
- Power supply voltage: 12.25 VDC
- Tx Module Power Draw: ~166 mA @ 12VDC
- Rx Module Power Draw: ~258 mA @ 12VDC
- Optical Tx wavelength: 1310 nm
- Dimensions (Tx and Rx): 138 mm (5.43") W X 77 mm (3.03") H X 33 mm (1.30") D (including flange and connectors)
- Weight: Tx: 223 g (7.9 oz)
- Rx: 229 g (8.1 oz)
- Operating temperature: -25° C to 75° C (-13° F to 167° F)
- RF Connectors: BNC female
- Optical connectors: ST/UPC
