Product Description
Audio-Technica ATW-902A
Audio-Technica's System 9 is a four-channel frequency-agile wireless system designed to provide rock-solid performance along with easy setup and clear, natural sound quality. Featuring sleek, stackable, contemporary styling, System 9 is available in handheld, headworn, guitar, lavalier and body-pack configurations. The system offers four compatible user-switchable VHF channels (169.505, 170.245, 171.045, and 171.905 MHz).
Each System 9 configuration includes the ATW-R900a receiver and either a body-pack transmitter or handheld microphone/transmitter. The ATW-R900a is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R900a also offers volume control along with AF Peak, RF and Power indicator lights.
FEATURES:
- Easy operation and clear, natural sound quality
- 4 selectable frequency-coordinated VHF channels
- Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
- Reliable performance and durable construction
- Advanced dipole antenna system for extended operating range
CONFIGURATION:
ATW-902a - ATW-R900a receiver and ATW-T902a handheld dynamic unidirectional microphone/transmitter.
Includes AT8456a Quiet-Flex™ stand clamp.
SPECIFICATIONS:
| OVERALL SYSTEM SPECIFICATIONS | |
|---|---|
| Operating Frequencies | VHF highband, 169 MHz to 172 MHz |
| Modulation Mode | FM |
| Maximum Deviation | +/-10 kHz |
| Dynamic Range | >/=90 dB (A-weighted), typical |
| Total Harmonic Distortion | <1% (at 1 kHz, +/-10 kHz deviation) |
| Operating Range | 200' (60 m) typical Open range environment with no interfering signals |
| Operating Temperature Range | 40° F (4° C) to 110° F (43° C) Battery performance may be reduced at very low temperatures |
| Frequency Response | 80 Hz to 13 kHz |
| RECEIVER SPECIFICATIONS | |
|---|---|
| Receiving System | Non-diversity, single-channel, dual antenna system |
| Image Rejection | 50 dB minimum |
| RF Sensitivity | 20 dBuV at 60 dB S/N ratio (50 ohms termination) |
| Audio Output | Nominal Output Level XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load) 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load) |
| Power Supply | 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply |
| Dimensions | 7.48" (190.0 mm) W x 1.82" (46.2 mm) H x 5.06" (128.5 mm) D |
| Net Weight | 12.0 oz (337 grams) |
| Accessory Included | Power supply |
| BODY-PACK TRANSMITTER SPECIFICATIONS | |
|---|---|
| RF Power Output | 10 mW |
| Spurious Emissions | Following federal and national regulations |
| Input Connections | Four-pin Locking Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V |
| Batteries | Two 1.5V AA not included |
| Battery Life | 8 hours (alkaline) Depending on battery type and use pattern |
| Dimensions | 2.76" (70.2 mm) W x 4.08" (103.7 mm) H x 0.98" (24.9 mm) D |
| Net Weight | 2.8 oz (80.0 grams) without batteries |
| HANDHELD TRANSMITTER SPECIFICATIONS | |
|---|---|
| RF Power Output | 10 mW |
| Spurious Emissions | Following federal and national regulations |
| Batteries | Two 1.5V AA not included |
| Battery Life | 8 hours (alkaline) Depending on battery type and use pattern |
| Dimensions | 9.91" (251.8 mm) long, 2.11" (53.5 mm) diameter |
| Net Weight | 9.2 oz (260 grams) without batteries |
| Accessory Included | AT8456a Quiet-Flex™ stand clamp |
First-generation System 9 (original) components:
ATW-R900 receiver
ATW-T901 body-pack transmitter
ATW-T902 unidirectional dynamic microphone transmitter
