Product Description
Audio-Technica ATH-M20xBT Wireless Over-Ear Headphones (Black)
Key Features
- 40mm Dynamic Drivers
- Copper-Clad Aluminum-Wire Voice Coils
- Up to 60 Hours of Battery Life
- Soft, Noise-Isolating Earcups
- Low-Latency Mode for Audio/Video Sync
- Pair to 2 Devices with Multipoint
- Built-In Mic for Hands-Free Calling
- Audio Cable Included for Wired Use
- Up to 3 Hours via 10-Minute Quick Charge
- Comfortable Padded Headband
Overview
With the addition of wireless capabilities, the black ATH-M20xBT Wireless Over-Ear Headphones from Audio-Technica are an introduction to the M-Series that can be more easily used inside and outside of the studio, compared to their wired counterpart. Whether you're a pro or simply a music fan, this Bluetooth wireless version of the ATH-M20x is made to deliver full-range, hi-fi audio reproduction using large, 40mm drivers with rare-earth magnets and copper-clad aluminum wire voice coils.
With a long battery life of up to 60 hours joining soft, noise-isolating earpads a padded headband, and integrated mobile-friendly technologies, you can comfortably enjoy your audio for days, whether it's music, streaming video, gaming, or phone calls
Low-Latency Mode
Pair to Two Devices with Multipoint
Go Wireless or Wired
Additional Features
- Built-in mic for hands-free calling
- Integrated controls for calls, playback, and volume
- Up to 3 hours of playback with just a 10-minute rapid charge
Specs
| Earpiece Design | Over-Ear (Circumaural), Closed-Back |
| Earpiece Swivel | Not Specified by Manufacturer |
| Earpiece Connection / Wearing Style | Headband |
| Foldable | Not Specified by Manufacturer |
| Driver Type | Dynamic |
| Driver Size | 1.6" / 40 mm |
| Magnet Type | Neodymium |
| Voice Coil | Copper-Clad Aluminum Wire |
| Impedance | 36 Ohms |
| Active Noise Cancellation | No |
| Controls/Microphone Location | Controls: Left Earpiece Microphone: Left Earpiece |
| Full Remote OS Support | Not Specified by Manufacturer |
| Mobile App Compatible | No *As of January, 2023: Check with manufacturer for the most up-to-date compatibility |
| Frequency Response | 5 Hz to 32 kHz (Wireless) |
| Sensitivity | 100 dB/mW |
| Number of Voice Mics | 1 |
| Type | Electret Condenser |
| Pickup Pattern | Omnidirectional |
| Noise Canceling | Not Specified by Manufacturer |
| Frequency Response | 50 Hz to 20 kHz |
| Sensitivity | -42 dB at 1 kHz / 1000 mV/Pa |
| Wireless Modulation | Bluetooth: π/4 DQPSK, 8DPSK, GFSK |
| Bluetooth | 5.0 |
| Supported Audio Codecs | AAC, SBC |
| Bluetooth Profiles | A2DP, AVRCP, HFP, HSP |
| Wireless Range | 33' / 10.1 m (Bluetooth) |
| Frequency | Bluetooth: 2.4 GHz (2.402 to 2.48 GHz) |
| Bluetooth Transmitter Power | 10 mW |
| NFC | No |
| Audio Connector to Source | 1 x 1/8" / 3.5 mm TRS Right-Angled |
| Audio Connector to Earpiece | 1 x 1/8" / 3.5 mm |
| Cable Length | 1 x 3.9' / 1.2 m (1/8" / 3.5 mm) |
| Battery Chemistry | Lithium-Ion Polymer (LiPo) |
| Runtime | 60 Hours (BT) |
| Quick Charging Times | 10 Minutes for 3 Hours |
| Recharge Time | 4 Hours |
| Wireless Charging | None |
| Charging Port | USB-C |
| Charging Interface | Not Specified by Manufacturer |
| Operating Temperature | 41 to 104°F / 5 to 40°C |
| Color | Black |
| Weight | Headphones: 7.6 oz / 216 g |