Product Description
Audio-Technica AT-VM95C/H Headshell/Cartridge Combo Kit
The AT-VM95C/H combo kit includes the AT-VM95C dual moving magnet cartridge premounted on the AT-HS6BK headshell.
Features:
- VM dual magnet cartridge with 0.6 mil conical stylus
- Aluminum cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required
- Compatible with any AT-VMN95 replacement stylus
- Universal ½"-mount headshell for 4-pin turntable cartridges
Specifications:
Frequency Response | 20-20,000 Hz |
Channel Separation | 18 (dB at 1 kHz) |
Vertical Tracking Force | 1.8-2.2 g (2.0 g standard) |
Stylus Construction | Bonded round shank |
Recommended Load Impedance | 47,000 ohms |
Output | 4.0 mV (1 kHz, 5 cm/sec.) |
Channel Balance | 2.5 dB (1 kHz) |
Stylus Shape | 0.6 mil conical |
Cantilever | Aluminum pipe |
Mount | Half-inch |
Replacement Stylus | AT-VMN95C |
Coil Impedance: 3.3 k ohms (1 kHz)
DC Resistance: 485 ohms
Load Capacitance: 100 to 200 pF
Coil Inductance: 550 mH (1 kHz)
Vertical Tracking Angle: 23°
Dimensions (Cartridge): 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
Weight (Cartridge): 6.1 g (0.22 oz)
Dimensions (Cartridge & Headshell): 21.2 mm (0.83") H × 21.4 mm (0.84") W × 62.4 mm (2.46") D
Weight (Cartridge & Headshell): 15.5 g (0.55 oz)
Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers