The AT-LP60XHP turntable and headphones combination lets you enjoy your 33-1/3 and 45 RPM records with no additional equipment required. Based on the AT-LP60X fully automatic belt-drive turntable, the AT-LP60XHP adds an integrated headphone amplifier with a 3.5 mm (1/8") headphone jack and volume control on the front panel, so all you have to do is plug in the included ATH-250AV over-ear headphones (or other headphones of your choice) and start the records spinning.

Of course, the turntable can also be connected to your stereo, powered speakers, computer or other components and used as a standard turntable. The detachable RCA output cable (3.5 mm male to dual RCA male) and built-in switchable phono preamp allow the turntable be connected to components with and without a dedicated phono input. Like the AT-LP60X, the AT-LP60XHP features a redesigned tonearm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60XBT’s Dual Magnet cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup.

The ATH-250AV headphones are equipped with 40 mm drivers for clear mid- and low-frequency reproduction. The lightweight construction and comfortable, isolating earpads allow you to listen for as long as you like, and the 3.5 m (11.5') cable gives you plenty of flexibility.

The turntable comes with a 45 RPM adapter and a removable hinged dust cover.

Replacement Stylus: ATN3600L

Features

Experience the high-fidelity audio of vinyl

Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM

Integrated headphone amplifier with front-panel 3.5 mm (1/8") headphone jack and volume control

ATH-250AV over-ear headphones with 40 mm drivers, 3.5 m (11.5') cable and 3.5 mm (1/8") stereo mini-plug

Anti-resonance, die-cast aluminum platter

Redesigned tonearm base and headshell for improved tracking and reduced resonance

Integral Dual Magnet phono cartridge with replaceable diamond stylus (ATN3600L)

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Built-in switchable phono pre-amplifier for phono- or line-level output

Includes: ATH-250AV headphones, detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover

Specifications

Type	Belt drive turntable, fully automatic
Motor	DC servo-controlled
Speeds	33-1/3 RPM, 45 RPM
Turntable Platter	Aluminum
Wow and Flutter	Less than 0.25% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio	>50 dB (DIN-B)
Output Level	Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain	36 dB nominal, RIAA equalized
Power Supply Requirements	120V AC, 60 Hz, 3W
Dimensions	359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.3 mm (14.70") D
Accessories Included	3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable; 45 RPM adapter; removable hinged dust cover

Headphone Specs

Type: Closed-back Dynamic
Driver Diameter: 40 mm
Frequency Response: 18 – 22,000 Hz
Maximum Input Power: 500 mW
Sensitivity: 102 dB/mW
Impedance: 43 ohms
Weight: 97 g (3.4 oz), without cable
Cable: 3.5 m (11.5')
Connector: 3.5 mm (⅛") stereo mini-plug

Other Details

U.S. ONE-YEAR LIMITED END-USER WARRANTY Select Audio-Technica brand products purchased in the U.S.A. from an authorized Audio-Technica (A.T.U.S.) dealer are warranted for one year from date of purchase by A.T.U.S. to be free of defects in materials and workmanship. In event of a defect, End-User’s exclusive remedy is at A.T.U.S.’ election, the cost of repair, refund of the purchase price in the form of credit or cash, or replacement of the product. The product must be delivered to A.T.U.S. or an Authorized Service Center, prepaid, together with the sales slip or other proof of purchase date. This warranty excludes defects due to normal wear, abuse, shipping damage, or failure to use product in accordance with instructions. This warranty is void in the event of unauthorized repair or modification, or removal or defacing of the product labeling. For U.S. service return instructions and procedure please go to: www.audio-technica.com/service. A.T.U.S.’ warranty is to the End User only. Except for A.T.U.S.’ said express warranty, A.T.U.S. MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS. A.T.U.S. SPECIFICALLY MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Except to the extent precluded by applicable state law, A.T.U.S. IS NOT LIABLE FOR CONSEQUENTIAL, INCIDENTAL, DIRECT OR SPECIAL DAMAGES ARISING, DIRECTLY OR INDIRECTLY, IN RESPECT OF SUCH PRODUCTS OR USE OR FAILURE THEREOF, WHETHER BASED ON BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY, TORT OR OTHERWISE. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. Outside the U.S.A., please contact your local dealer for warranty details.

Shop by Category

Shop by Brand

Audio-Technica AT-LP60XHP-GM Fully Automatic Belt-Drive Stereo Turntable with Headphones

Product Description

Audio-Technica AT-LP60XHP-GM Fully Automatic Belt-Drive Stereo Turntable with Headphones

Other Details

Product Videos

Custom Field

Product Reviews

Recommended