Product Description
Ashly SRA-4075 Convection-Cooled 1U Power Amplifier 4 x 75W
SRA Convection-Cooled Amplifiers are advanced, efficient single-space amplifiers perfect for installations with modest power requirements. The SRA Series makes it a snap to get exactly what you need and nothing you don’t.
Housed in compact single rack space chassis and weighing only 10 lbs, SRA Convection-Cooled Amplifiers are designed to drive 4 or 8-ohm loads. Choose from 4 models available in 2 and 4-channel configurations with power ratings of 75W and 150W per channel.
The 150W models are capable of driving 25V constant voltage lines directly. Switch mode power supplies and Class-D amplifier circuitry provide an extremely power efficient solution.
OVERVIEW
SRA Convection-Cooled Amplifiers are advanced, efficient single-space amplifiers perfect for installations with modest power requirements. The SRA Series makes it a snap to get exactly what you need and nothing you don’t.
Housed in a compact single rack space chassis and weighing only 10 lbs, SRA Convection-Cooled Amplifiers are designed to drive 4 or 8 Ohm loads. Choose from 4 models available in 2 and 4-channel configurations with power ratings of 75W and 150W per channel.
The 150W models are capable of driving 25V constant voltage lines directly. Switch mode power supplies and Class-D amplifier circuitry provide an extremely power efficient solution. They are convection cooled, so little maintenance is needed after the installation, and no annoying fan noise. Of course you get the reliability, superior sonic quality and rugged construction you’ve come to expect from Ashly.
FEATURES
■ Extremely low noise, convection cooled
■ Extensive protection circuitry including output overcurrent protection, DC output protection, main supply rail overvoltage protection, internal chassis temperature monitoring, in-rush limiting and mains fuse
■ Level attenuators with level control
■ Signal present and clip alert status LEDs
■ 2-channel versions have a stereo headphone jack
■ Selectable input sensitivity
■ 80 Hz/ Off High Pass Filter
■ Rear panel Gain Switch: +36 dB or +26dB input sensitivity
■ Euroblock inputs/outputs
■ Normal or bridged mode switch on each channel
■ Remote power turn ON/OFF
■ Adjustable turn-on delay up to 7.5 seconds
■ Safety/Compliance: TUV, CE, FCC, RoHS
■ 5-Year Warranty
Other Details
Ashly Audio Inc. Limited Warranty (USA ONLY)
(Other countries please contact your respective dealer or distributor)
For units purchased in the USA, warranty service for this unit shall be provided by
ASHLY AUDIO, INC. in accordance with the following warranty statement:
ASHLY AUDIO, INC. warrants to the owner of this product that it will be free from defects
in workmanship and materials for a period of FIVE years from the original date of purchase.
ASHLY AUDIO INC. will without charge, repair or replace at its discretion any defective
product or component parts upon prepaid delivery of the product to the ASHLY AUDIO,
INC. factory service department, accompanied with a proof of original date of purchase in
the form of a valid sales receipt. This warranty gives you specific legal rights, and you may
also have other rights, which vary from state to state.
EXCLUSIONS: This warranty does not apply in the event of misuse, neglect or as a result of
unauthorized alterations or repairs made to the product. This warranty is void if the serial
number is altered, defaced, or removed. ASHLY AUDIO reserves the right to make changes
in design, or make additions to, or improvements upon this product, without any obligation
to install the same on products previously manufactured.
Any implied warranties which may arise under the operation of state law shall be effective
only for FIVE years from the original date of purchase of the product. ASHLY AUDIO,
INC. shall be obligated to only correct defects in the product itself. ASHLY AUDIO, INC.
is not liable for any damage or injury which may result from or be incidental to or a
consequence of such defect. Some states do not allow limitations on how long an implied
warranty lasts, or the exclusion, or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you.
OBTAINING WARRANTY SERVICE:
For warranty service in the United States, please follow this procedure:
1.) Return the product to ASHLY AUDIO, INC, freight prepaid, with a written statement
describing the defect and application that the product is used in. ASHLY AUDIO,
INC. will examine the product and perform any necessary service, including
replacement of defective parts, at no further cost to you.
2.) Ship your product to:
Ashly Audio Inc.
Attn: Service Department
847 Holt Road
Webster, NY 14580-9103
Product Videos
