Product Description
ADJ SWEEPER BEAM QUAD LED RGBW Beam Sweeper Effect Light
The Sweeper Beam Quad LED is a intelligent, multiLED scanner. The Sweeper Beam Quad LED can operate as a stand alone fixture or in a Master/Slave configuration. The Sweeper Beam Quad LED has three operating modes; sound active mode, show mode, and DMX control. This fixture is suitable for theaters, studios, retail stores, and other similar locations. For best results use fog or special effects smoke to enhance the beams projections.
Sku #: SWE199
Specs
- Unique lighting fixture with quick sweeping narrow beams combined with an 8-Zone LED chase
- 8x 8-Watt RGBW LEDs
- 4-Button DMX LED Display
- 3 Operational modes: DMX controller, Master/Slave & Sound Active
- 4 DMX Channel modes (1, 6, 35 or 39 channels)
- DMX-512 Protocol
- With Wired Digital Communication Network
- Electronic Dimming: 0 - 100%
- Includes exciting sound activate built-in programs
- LED pulse & strobe effect
- 270 degree tilt from smooth Stepper Motors
- Extremely Long Life (50,000 hr. rated)
- Power Cord Daisy Chain: 4 Fixtures Max.
- Beam angle: 3.4-degrees
- Runs extremely cool! - NO Duty Cycles! – Run all night!
- Includes mounting brackets to mount on a wall or set on the ground
- Safety hook on rear panel
- Very low power consumption - connect more units in a single circuit
- IEC AC IN/OUT on rear to daisy chain power (up to 4 Sweeper Beam Quad LED’s @ 120V and 7 Sweeper Beam Quad LED’s @ 230V )
- Compatible with ADJ UC3 Series easy-to-use controllers (sold Separately)
- Power Consumption: 81W maximum
- Multi-voltage operation: AC 100-240V 50/60Hz- IEC socket
- Power cable length: 1.5 meter (IEC)
- Dimensions (LxWxH): 38.5”x 3”x 5.25” / 973 x 73 x 132mm
- Weight: 14 lbs. / 6.3 kg.
- ETL Approved