Product Description
ADJ DOTZ PAR PAK 4x Dotz RGB COB LED Pars and Dotz Par Wireless Remote
The Dotz Par Pak has four ADJ Dotz Pars plus one ADJ Dotz Par RF Remote. The wireless remote may be used up to 75 feet / 25 meters and makes it easy for performers or lighting designers to change the color and take control of their Dotz Pars from a distance.
Included
- Four ADJ Dotz Par Chip-On-Board LED par fixtures
- Dotz Par RF Remote
Specs
- High-output slim low-profile Par fixture with one TRI (3-IN-1) RGB COB LED
- COB Technology (Chip On Board) produces powerful, smooth RGB color mixing with rich palettes of color
- Use as Wash/par or Pixel Mapped for a stunning visual effect
- Five Operational modes: Auto Run, Sound Active, Color Macro, Dimmer, and DMX Controlled Mode
- Four DMX channel modes: 3, 4, 5 or 9 channel
- Intelligently designed, patent pending power & DMX Ins/Outs sit sideways so the unit can be set flat on the ground or set inside truss
- Built-In preset colors and programs
- Flicker-Free operation (No flickering on camera)
- 35 built-in Color Macros
- LED pulse and strobe effect
- Electronic Dimming: 0 - 100%
- Five selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre)
- Beam angle: 60° (25° with supplied lens kit)
- 3-pin XLR chassis mount connectors for DMX linking
- IEC AC IN/OUT to daisy chain power (up to 13 Dotz Pars @ 110V and 28 Dotz Pars @ 230V)
- Power Draw: 36W total (All LEDs @ Full On)
- 4-button LCD DMX display on rear panel
- Compatible with ADJ Par RF wireless remote control
- Single yoke allows fixture to be mounted
- Light Source: 1x 36-Watt COB TRI LED (RGB: 3-IN-1, rated at approximately 50,000 hrs)
- Auto sensing power supply: AC 100V/60Hz - 240V/50Hz
- Dimensions (LxWxH): 13. 5" x 5.75" x 5.75" (340 x 140 x 140 mm)
- Weight: 5 lbs (2 kg)