Product Description
Altman CDR150 Chalice 150 Watt 6-inch Recessed Ceiling Mount Downlight
The Chalice 150 recessed LED downlight follows the Altman Lighting tradition of lighting quality. Designed specifically for the demands of theaters, churches and public venues, the Chalice 150 is a 145 Watt White LED recessed fixture that is an energy-efficient solution to general lighting needs.
The Chalice 150 addresses and alleviates the typical maintenance routines of difficult-to-access locations. The Chalice 150 uses a single-point source for optimal beam control, and offers a variety of reflector options for ceiling heights from 15 to 50 feet. Its powerful and clean non-pixelated and non-granulated output blends to seamless coverage in the most elegant setting.
Extremely smooth dimming reproduces the comfortable feel of traditional incandescent sources, at a fraction of the power consumption. Available in either Mains Dimming or DMX control allows each fixture to be controlled independently or in groups, from an architectural control system and/or directly from a theatrical control console.
Please Note: The 277V is available for DMX ONLY.
Features
- 150W LED driver
- 7 interchangeable reflectors
- CCT options 2700K, 3000K, 4000K, or 5000K
- Available in new construction and remodeler versions
- DMX or Mains Dimmable
- Push Button DMX Addressing and RDM compatibility
- DMX Pass through
- Single channel high resolution DMX
- Selectable actions on loss of control signal (for DMX models only)
- Available in white, black or custom colors
- cETLus listed for indoor applications
- Proudly made in the USA
NOTES: Noise levels on mains dim luminaries are subject to the dimming/switching systems in which they are wired. Electrical systems displaying harmonics may increase the dB Noise output of the luminaire.
Do not connect more than four (4) mains dim luminaires to the same dimmer. Connecting more than four luminaires to the same dimmer will result in undesired low-end dimmer response. Dimmer must be sized appropriately to handle luminaire load.
Maximum number of DMX controlled fixtures is as per installed breaker current breaking capacity and inrush current capacity.
One (1) sloped ceiling adapter is included with each sloped unit ordered. Specify sloped ceiling adapter at time of ordering.
Up to 25% beam clipping will occur, with the use of 51°, 64°, and 90°. angle reflectors on the long axis of a sloped ceiling adapter. Please allow for standard 20% to 30% beam overlap when using the sloped ceiling adapter accessory and these reflectors.
For best performance in sloped ceiling applications and masking of beam, 20, 29, or 46 degree reflectors should be used.
Accessories (Sold Separately)
