Product Description
ADJ DRC MHX Dual Road Case for ADJ Hydro Beam X2, Vizi CMY 16RX, CMY300, BSW 300, Hybrid 16RX, or 5RX
Overview
Keep your gear safe as you travel to your next shoot with the black Dual Road Case for ADJ Hydro Beam X2, Vizi CMY 16RX, CMY300, BSW 300, Hybrid 16RX or 5RX from American DJ. This case is designed for safely storing two compatible American DJ lights, allowing you to load them head first and hang them from their base to help ensure maximum protection. Two large compartments with foam cutouts are used for the fixtures, while the slim central section offers space for cables, clamps, or other small accessories. Lights compatible with this case include the ADJ Hydro Beam X2, Vizi CMY 16RX, Vizi CMY300, Vizi BSW 300, Vizi Hybrid 16RX, or Vizi Beam 5RX moving heads.
The case features a top-loading lid that has foam on the inside, which opens via two recessed spring latches found in the front. A 3/4" plywood sheet is used for the base plate, with each corner of the case reinforced with high-impact metal to enhance durability. For easy transport, the four caster wheels offer unrestricted movement and are rated to withstand up to 300 pounds. Accompanying them are four spring-loaded handles, two on each side, which can be used to help guide the case as you roll it or carry it. Stacking cups at the top of the lid can accommodate the wheels of an identical model case.
Features
- The ADJ DRC MHX is a rugged road case engineered specifically to fit two ADJ Hydro Beam X2, Vizi CMY 16RX, Vizi CMY300, Vizi BSW 300, Vizi Hybrid 16RX, or Vizi Beam 5RX moving heads
- Interior space and lid both have foam for added protection, with their design allowing you to load the lights head first and hang them from their base
- Central pocket between the two light compartments can be used for small items such as power cables and stand accessories
- Double-spring latches on the front for opening and closing the case
- Four durable caster wheels, rated for up to 300 pounds, allow for free movement in any direction
- Two spring-loaded handles on both the right and left side of the case, for a total of four support points that can be used for hand carrying or safe rolling
- Recessed slots on lid fit the wheels of another DRC MHX, so you can stack identical models during transport
- 3/4" plywood base plate with reinforced high-impact corners
Specifications
Interior
| Padding |
2" / 5.08 cm Foam |
| Dividers |
Yes |
Exterior
| Closure Type |
Latch |
| Carry and Transport Options |
4 x Recessed Handle |
| Casters |
4 (2 Lockable) |
| Material of Construction |
Metal, Plywood, Steel, Wood |
| Exterior Dimensions (W x H x D) |
36 x 20.2 x 33.8" / 91.4 x 51.3 x 85.9 cm |
| Weight |
105 lb / 47.6 kg |
Other Details
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.
B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the product–please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
D.This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August 15, 2012, and bear identifying marks to that effect.
E.ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.
This warranty is the only written warranty applicable to ADJ Products, LLC and American Audio products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.
MANUFACTURER’S LIMITED WARRANTY PERIODS:
Non L.E.D. Lighting Products = 1-year (365 days) Limited Warranty (Such as: Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands etc. excluding LED and lamps)
Laser Products = 1 Year (365 Days) Limited Warranty (excluding laser diodes which have a 6 month limited warranty)
L.E.D. Products = 2-year (730 days) Limited Warranty (excluding batteries which have a 180 day limited warranty). Note: 2 Year Warranty only applies to purchases within the United States.
StarTec Series = 1 Year Limited Warranty (excluding batteries which have a 180 day limited warranty).
ADJ DMX Controllers = 2 Year (730 Days) Limited Warranty
All American Audio branded products = 1-year (365 days) Limited Warranty (except V-Plus Series Amplifiers)
All American Audio V-Plus Series Amplifiers = 3-year (1095 days) Limited Warranty
Product Videos
Custom Field
