Product Description

System 10 Digital Wireless Systems

ATW-1101/G
ATW-R1100 receiver and ATW-T1001 UniPak® transmitter with AT-GcW guitar/instrument input cable. 

Audio-Technica’s System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display. 

System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity. 

Featuring stackable, contemporary styling, System 10 is available in multiple system configurations, with handheld vocal microphone/transmitters and UniPak® body-pack transmitters designed for use with lavalier, headworn and instrument microphones as well as electric guitars. Each configuration includes the ATW-R1100 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R1100 is a digital receiver offering volume control along with AF Peak and Pair indicator lights. 

• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance 

• 2.4 GHz range – completely free from TV interference 

• Three levels of diversity assurance: frequency, time, & space 

• Automatic frequency selection for seamless, interference-free operation 

• Extremely easy operation with instantaneous channel selection, sync, and set-up 

• State-of-the-art digital receiver for reliable performance 

• Balanced XLR and unbalanced 1/4” output jacks with level control

• OVERALL SYSTEM SPECIFICATIONS
  Operating Frequencies	2.4 GHz ISM band
  Dynamic Range	>109 dB (A-weighted), typical
  Total Harmonic Distortion	<0.05% typical
  Operating Range	30 m (100') typical Open range environment with no interfering signals
  Operating Temperature Range	0° C to +40° C (32° F to 104° F)  Battery performance may be reduced at very low temperatures
  Frequency Response	20 Hz to 20 kHz  Depending on microphone type

  RECEIVER SPECIFICATIONS
  Receiving System	Diversity (frequency/time/space)
  Maximum Output Level	XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
  Power Supply	100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
  Dimensions	190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
  Net Weight	290 grams (10.2 oz)
  Accessory Included	Power supply

  BODY-PACK TRANSMITTER SPECIFICATIONS
  RF Power Output	10 mW
  Spurious Emissions	Following federal and national regulations
  Input Connections	Four-pin Locking Connector  Pin 1: GND, Pin 2: INST INPUT,  Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
  Batteries	Two 1.5V AA  not included
  Battery Life	>7 hours (alkaline)  Depending on battery type and use pattern
  Dimensions	70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
  Net Weight	100 grams (3.5 oz)  without batteries

  HANDHELD TRANSMITTER SPECIFICATIONS
  RF Power Output	10 mW
  Spurious Emissions	Following federal and national regulations
  Batteries	Two 1.5V AA  not included
  Battery Life	>7 hours (alkaline)  Depending on battery type and use pattern
  Dimensions	254.8 mm (10.03") long,  50.0 mm (1.97") diameter
  Net Weight	280 grams (9.9 oz)  without batteries
  Accessory Included	AT8456a Quiet-Flex™ stand clamp