Product Description
ETC S4WRDC Source 4WRD Color, Retrofit Kit
This product has been updated into the S4WRDCII.
The Source 4WRD Color LED engine transforms your existing Source Four incandescent profile into an RGBA LED fixture, unlocking the world of additive color mixing, saturated washes, and quick color changes. It means more stage looks with fewer fixtures using less energy and needing less maintenance, all at a compelling price point.
The simple and quick upgrade is non-destructive and takes only minutes. • RGBA color mixing • Can be fitted to any full-size Source Four ellipsoidal fixture body • Supports Source 4WRD PAR and PARNel fixture bodies • Simple installation and setup • Uses standard switched power (non-dimmed) • 3-year warranty
Ships With: Source 4WRD Color Retrofit ships with a 1 m (3 ft) three-wire power lead with bare ends or chosen connector, a threaded guide rail, and reflector diffusion. Each order also ships with a Data Accessory Kit.
Note: You must have DMX control for this retrofit kit to work properly. If you do not have a DMX control system, then this retrofit kit will not work. Please call us if you have any questions about DMX control. We are reachable at 1-866-457-5937.
GENERAL INFORMATION
The Source 4WRD Color LED engine transforms your existing Source Four incandescent profile into an RGBA LED fixture, unlocking the world of additive color mixing, saturated washes, and quick color changes.
It means more stage looks with fewer fixtures using less energy and needing less maintenance.
The simple and quick upgrade is nondestructive and takes less than five minutes. Source 4WRD Color uses switched power, 100–240 VAC, and dims via DMX. And, because it is an LED source, your fixtures will run cool and efficiently without lamp replacements
APPLICATIONS
- Energy-saving retrofits
- Houses of worship
- Universities and schools
- Hospitality
- Retail
- Exhibition centers
- Meeting rooms
- Clubs
- Theatres
Upcycled Color
The Source 4WRD Color LED engine transforms your existing Source Four incandescent profile into an RGBA LED fixture, unlocking the world of additive color mixing, saturated washes, and quick color changes. It means more stage looks with fewer fixtures using less energy and needing less maintenance, all at a compelling price point.
Move 4WRD in Five
It takes less than five minutes to upcycle your Source Four to 4WRD Color. The Source 4WRD Color provides a simple, cost-effective, non-destructive retrofit of existing Source Four profile fixtures. You can quickly convert an incandescent Source Four ellipsoidal fixture to an RGBA color-changing luminaire while retaining all the best features of the Source Four.
Lighting PAR Excellence
Source 4WRD Color technology is also available in two complete wash light fixtures.
The Source 4WRD Color PAR and PARNel deliver soft-edges and saturated color, no retrofit required.
These luminaires incorporate the Source 4WRD Color LED engine into a custom housing, offering economical color washes, including zoom on the PARNel version.
S P E C I F I C A T I O N S
SOURCE
- Nichia LEDs
- 4,881 / 3,713 / 4,463 Max lumens
- 33.9 / 36.8 / 34.3 Lumens per watt
- L70 rating (hours to 70% output): TBA hours (both variants)*
COLOR
- Colors used: RGB-A (Red, Green, Blue and Amber)
- Color temperature range 2,200–6,500 K
- Calibrated array
- No red shift
OPTICAL
- Swappable lens tubes between 5-90 degrees
- 79 mm Gate size
- 6.25”-14” (depending on lens tube) aperture size
- Pattern projection
- A or B Pattern size
- 1.2 K and 20 K Camera flicker control/ Hz range
ELECTRICAL
- 100-240 VAC 50/60 Hz
- powerCON power in and thru
- 32 A at 120 V (First half-cycle)
60 A at 240 V (First half-cycle) - 10 fixtures (20 A power thru connector) or 10 fixtures (R20 module or similar)
- 146 W / 3.00 W at 120 V
- 1.25 A at 120 V
THERMAL
- Ambient operating temp: 5°–50° C (41°–122° F)
- Fan (controllable)
- No Droop compensation
- TBD dBa average at 1 m
- 458 BTUs/hour (120 V)
449 BTUs/hour (240 V)
CONTROLS
- DMX or RJ45 connectors Input method
- DMX / RDM via RJ45
- 6 modes for footprint
- RDM configuration
- UI type: Seven-segment
- 12 Onboard presets
- 5 Onboard sequences
- No onboard effects
- Fixture-to-fixture control
*Note about LED luminaire lifetime:
ETC utilizes a nationally recognized third-party lab for luminaire testing according to IES LM-84. See etcconnect.com/About/News/ETC-Fixture-Ratings-and-Warranties-Extended.aspx.