ETC S4WRDCII Source 4WRD Color II, Retrofit Kit
Source 4WRD Color II is a leap forward in performance that transforms your existing Source Four incandescent profile into an RGBA LED fixture, unlocking the world of additive color mixing, saturated washes, and quick color changes. You get more stage looks with fewer fixtures while using less energy. No more changing lamps or replacing burned out gel. The simple nondestructive upgrade takes less than five minutes. Source 4WRD Color II uses switched power, 100–240 VAC, and dims via DMX.
Help give new life to the millions of Source Four fixtures that are out in the world with Source 4WRD Color II. Transform any existing incandescent Source Four fixture into a red, green, blue, and amber (RGBA) LED fixture in minutes and add color to schools, houses of worship, and theatre stages everywhere.
Making the move from incandescent to LED is not always a simple decision, but Source 4WRD Color II makes the choice a little easier. Bring the flexibility of additive color mixing, saturated washes, and quick color changes to each venue. Upcycle Source Four fixtures to reduce waste and use only a quarter of the power. Upgrade your technology while staying within budget, and by the way, no more changing lamps or gel!
Compared to the previous generation of Source 4WRD Color, the addition of the new snap-in reflector and the significantly brighter red emitter provide a notable intensity increase of 36% in warm whites and dramatically improves color rendering performance. Rich, saturated colors, pastel hues, and cool toning blues loved by theatre designers worldwide also see remarkable improvements.
This second generation of Source 4WRD Color is not only an incredible retrofit, but also can be a full spot profile, a full PAR, or a full PARNel fixture. With 12 built-in color presets and 5 built-in sequences, stand-alone operation is intuitive. Maintain the most-loved features of Source Four including crisp shutter cuts, beautiful pattern projection, field peak-to-flat adjustment, and a full library of Source Four lens tubes.
We’re proud to announce that all Source 4WRD products shipped after January 1, 2023, including the new Source 4WRD Color II, now carry ETC’s industry-leading 5-year fixture/10-year LED array warranty.
The Source 4WRD Color II LED engine transforms your existing Source Four incandescent profile into an RGBA LED fixture, unlocking the world of additive color mixing, saturated washes, and quick color changes. It means more stage looks with fewer fixtures using less energy and needing less maintenance, all at a compelling price point.
With the Source 4WRD Color II engine you get millions of looks with the same fixtures you’ve relied on for years.
Get full photometric and color information on ETC’s entire range of luminaires.
Download MyETC: Photometrics and take the guesswork out of your design.
Retrofit for Any Stage
Quickly convert your incandescent Source Four fixture to an RGBA luminaire! The color-changing functionality brings a modern edge to the best features of your existing Source Four fixtures without having to purchase a whole new rig.
Move 4WRD in Five
It takes less than five minutes to upcycle your Source Four to 4WRD Color II. The Source 4WRD Color II provides a simple, cost-effective, non-destructive retrofit of existing Source Four profile fixtures. You can quickly convert an incandescent Source Four ellipsoidal fixture to an RGBA color-changing luminaire while retaining all the best features of the Source Four.
Where Will You Move 4WRD?
Light, layered: Source 4WRD Color II is a happy companion to other ETC fixtures. The beautiful, theatrical dimming curve blends seamlessly with ColorSource, Desire, and Source Four LED luminaires – but also alongside traditional tungsten fixtures or Source 4WRD II.
The Z Factor
The Source 4WRD Color II retrofit brings you all the features of the Source Four including the ‘Z focus' or peak adjustment knob. With the Z focus knob you can project patterns with perfectly flat fields or blended washes with nuanced falloff.
With 12 built-in color presets and 5 built-in sequences right from the factory, stand-alone operation is a breeze. You can even record your own for even more versatility. With ETC’s FixtureLink technology you can send those presets to other cable-connected Source 4WRD Color II fixtures, as well as ColorSource, Source Four LED or Desire luminaires.
APPLICATIONS • Energy-saving retrofits • Houses of worship • Universities and schools • Hospitality • Retail • Exhibition centers • Meeting rooms • Clubs • Theatres
PRODUCT FEATURES • New, patented LED array and color mixing system • Increased brightness • 2x output in red • Improved color gamut and uniformity • Industry leading warranty and support
Source 4WRD Color II
MODEL DESCRIPTION UL PART NUMBER CE PART NUMBER
S4WRDCII Source 4WRD Color II Retrofit Kit, Black 7068A1011 7068A1211
For white please add -1 to the model / part number.
S P E C I F I C A T I O N S
- Nichia LEDs
- 6,042 / 5,051 / 5,687 Max lumens
- 42.2 / 46.3 / 45.9 Lumens per watt
- L70 rating (hours to 70% output): >60,000 hours*
- Colors used: RGB-A (Red, Green, Blue and Amber)
- Color temperature range 2,200–6,500 K
- Calibrated array
- No red shift
- Swappable lens tubes between 5-90 degrees
- 79 mm Gate size
- Aperture size: lens dependent
- Pattern projection
- A or B Pattern size
- 1.2 K and 20 K Camera flicker control/ Hz range
- 100-240 VAC 50/60 Hz power input
- 150 W draw at full
- Maximum of 10 fixtures per non-dimmed circuit (R20 module)
- Requires power from a non-dimmable source.
- 120 V: 32 A (first half-cycle)
- 240 V: 60 A (first half-cycle)
- Ambient operating temp: 5°–50° C (41°–104° F)
- Fan (controllable)
- No Droop compensation
- 27 dBa average at 1 m
- 458 BTUs/hour (120 V)
449 BTUs/hour (240 V)
- DMX / RDM via RJ45
- RDM configuration
- UI type: Seven-segment
- 12 Onboard presets
- 5 Onboard sequences
- No onboard effects
- Fixture-to-fixture control
Source 4WRD Color II Dimensions (120 V and 240 V)